国际口腔医学杂志

国际口腔医学杂志 ›› 2024, Vol. 51 ›› Issue (6): 653-661.doi: 10.7518/gjkq.2024100

• 专家笔谈 •    下一篇

流动树脂注射充填技术的临床应用

薛晶()   

  1. 口腔疾病防治全国重点实验室 国家口腔医学中心 国家口腔疾病临床医学研究中心四川大学华西口腔医院牙体牙髓病科 成都 610041
  • 收稿日期:2024-05-09 修回日期:2024-08-09 出版日期:2024-11-01 发布日期:2024-11-04
  • 通讯作者: 薛晶
  • 作者简介:薛晶，副主任医师，博士，Email：<email>jing_xue_scu@163.com</email>|<named-content content-type="corresp-name">薛晶</named-content>，博士，四川大学华西口腔医院牙体牙髓病科副主任医师。2004年本科毕业于四川大学华西口腔医学院，2009年毕业于四川大学华西口腔医学院，获口腔医学博士学位，曾赴澳大利亚悉尼大学牙学院、美国加州大学洛杉矶分校牙学院、美国华盛顿克雷格研究所、日本北海道大学牙学院、香港大学牙学院及瑞士日内瓦大学牙学院等机构研修。长期致力于牙体牙髓疾病的基础与临床研究，口腔微生物菌群研究及牙体硬组织早期病变的修复研究。已在国内外相关牙体牙髓学术刊物发表论著20余篇，参编牙体牙髓相关专著7部，主译《流动复合树脂修复》《实用牙体修复临床指南》《儿童与青少年牙齿急症治疗》《口腔医生执业健康指南：操作及体位的人体工程学》《牙髓病诊疗：原理与实践》专著5部。任职中华口腔医学会牙体牙髓专业委员会青年委员，四川省口腔医学会牙体牙髓专业委员会委员，四川省口腔医学会口腔镇静镇痛专业委员会常务委员，四川省口腔医学会口腔美学专业委员会常务委员。在牙体牙髓病学领域一直致力于医、教、研工作，对牙髓病和龋病的诊治有较深入的研究和丰富的临床经验。
  • 基金资助:
    四川大学华西口腔医院探索与研发项目-临床研究项目(LCYJ2023-YY-3)

Clinical applications of flowable composite injection technique

Jing Xue()   

  1. State Key Laboratory of Oral Diseases & National Center for Stomatology & National Clinical Research Center for Oral Diseases & Dept. of Cariology and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
  • Received:2024-05-09 Revised:2024-08-09 Online:2024-11-01 Published:2024-11-04
  • Contact: Jing Xue
  • Supported by:
    Clinical Research Program of Exploration and Research and Development Project of West China Hospital of Stomatology, Sichuan University(LCYJ2023-YY-3)

RichHTML

147

PDF (PC)

514

摘要：

随着流动树脂性能的提高，导板技术和数字化技术的不断发展，流动树脂注射充填新技术在临床有了更广阔的应用场景。流动树脂的操作简便性和高度可塑性使其临床技术敏感性降低，结合导板技术和数字化技术可优质、高效地完成复杂和疑难直接粘接修复病例。本文对流动树脂材料的进展、注射充填技术的内涵和发展以及注射充填技术的临床应用和注意事项进行阐述和讨论，为流动树脂注射充填技术在临床的应用提供参考。

关键词: 流动树脂, 注射充填技术, 前牙美学修复, 前牙间隙, 数字化

Abstract:

The novel flowable composite injection technique has found a widened range of clinical applications with the continuous improvement of flowable resin composites and development of silicon guide technology. The ease of ope-ration and high plasticity of the flowable composite injection technique reduce clinical technique sensitivity. Through the combination of silicon guide and digital technologies, complex and difficult direct adhesive restoration cases can be completed with high quality and efficiency. This article discusses the progress of flowable resin composite materials and the development and clinical application of the flowable composite injection technique. It provides a reference for the clinical application of the flowable composite injection technique.

Key words: flowable composite, injection technique, esthetic restoration of anterior teeth, anterior interdental space, digital

中图分类号: 

  • R781.05
1 Attar N, Tam LE, McComb D. Flow, strength, stiffness and radiopacity of flowable resin composites[J]. J Can Dent Assoc, 2003, 69(8): 516-521.
2 张元, 周洲, 于金华. 流动树脂的研究进展[J]. 口腔医学, 2016, 36(5): 475-477.
Zhang Y, Zhou Z, Yu JH. Research progress of flowa-ble resin[J]. Stomatology, 2016, 36(5): 475-477.
3 Bayne SC, Thompson JY, Swift EJ Jr, et al. A chara-cterization of first-generation flowable composites[J]. J Am Dent Assoc, 1998, 129(5): 567-577.
4 Atai M, Nekoomanesh M, Hashemi SA, et al. Physical and mechanical properties of an experimental dental composite based on a new monomer[J]. Dent Mater, 2004, 20(7): 663-668.
5 Garoushi S, Lassila LV, Tezvergil A, et al. Static and fatigue compression test for particulate filler composite resin with fiber-reinforced composite substructure[J]. Dent Mater, 2007, 23(1): 17-23.
6 楚小玉, 谢窈, 孙志辉, 等. 无机填料含量对流动树脂挠曲强度和压缩强度影响体外研究[J]. 中国实用口腔科杂志, 2013, 6(5): 289-291.
Chu XY, Xie Y, Sun ZH, et al. An in vitro investigation of the influence of filler volume upon flexural strength and compressive strength of flowable composite[J]. Chin J Pract Stomatol, 2013, 6(5): 289-291.
7 Tomaszewska IM, Kearns JO, Ilie N, et al. Bulk fill restoratives: to cap or not to cap: that is the question[J]. J Dent, 2015, 43(3): 309-316.
8 Abiodun-Solanke I, Ajayi D, Arigbede A. Nanotechnology and its application in dentistry[J]. Ann Med Health Sci Res, 2014, 4(): S171-S177.
9 Boruziniat A, Gharaee S, Sarraf Shirazi A, et al. Evaluation of the efficacy of flowable composite as lining material on microleakage of composite resin restorations: a systematic review and meta-analysis[J]. Quintessence Int, 2016, 47(2): 93-101.
10 Shaalan OO, Abou-Auf E, El Zoghby AF. Clinical evaluation of flowable resin composite versus conventional resin composite in carious and noncarious lesions: systematic review and meta-analysis[J]. J Conserv Dent, 2017, 20(6): 380-385.
11 Szesz A, Parreiras S, Martini E, et al. Effect of flowa-ble composites on the clinical performance of non-carious cervical lesions: a systematic review and meta-analysis[J]. J Dent, 2017, 65: 11-21.
12 4th Payne JH. The marginal seal of Class Ⅱ restorations: flowable composite resin compared to injec-table glass ionomer[J]. J Clin Pediatr Dent, 1999, 23(2): 123-130.
13 Xie H, Zhang F, Wu Y, et al. Dentine bond strength and microleakage of flowable composite, compomer and glass ionomer cement[J]. Aust Dent J, 2008, 53(4): 325-331.
14 Coachman C, De Arbeloa L, Mahn G, et al. An improved direct injection technique with flowable co-mposites. A digital workflow case report[J]. Oper Dent, 2020, 45(3): 235-242.
15 Ammannato R, Ferraris F, Marchesi G. The “index technique” in worn dentition: a new and conservative approach[J]. Int J Esthet Dent, 2015, 10(1): 68-99.
16 Ammannato R, Rondoni D, Ferraris F. Update on the ‘index technique’ in worn dentition: a no-prep restorative approach with a digital workflow[J]. Int J Esthet Dent, 2018, 13(4): 516-537.
17 Terry D, Powers J. Using injectable resin compo-site: part one[J]. Int Dent (Afr ed), 2014, 5(1): 52-62.
18 Terry D, Powers J. Using injectable resin compo-site: part two[J]. Int Dent (Afr ed), 2014, 5(1): 64-72.
19 Kouri V, Moldovani D, Papazoglou E. Accuracy of direct composite veneers via injectable resin composite and silicone matrices in comparison to diagnostic wax-up[J]. J Funct Biomater, 2023, 14(1): 32.
20 Vulović S, Stašić JN, Ilić J, et al. Effect of different finishing and polishing procedures on surface roughness and microbial adhesion on highly-filled composites for injectable mold technique[J]. J Esthet Restor Dent, 2023, 35(6): 917-926.
21 Peumans M, Geštakovski D, Mattiussi J, et al. Injection moulding technique with injectable composites: quick fix or long-lasting solution[J]. Int Dent (Afr ed), 2023, 13(1): 14-22.
22 Geštakovski D. The injectable composite resin technique: minimally invasive reconstruction of esthetics and function. Clinical case report with 2-year follow-up[J]. Quintessence Int, 2019, 50(9): 712-719.
23 Rangarajan V, Gajapathi B, Yogesh PB, et al. Concepts of occlusion in prosthodontics: a literature review, part Ⅰ[J]. J Indian Prosthodont Soc, 2015, 15(3): 200-205.
24 Rangarajan V, Yogesh PB, Gajapathi B, et al. Concepts of occlusion in prosthodontics: a literature review, part Ⅱ[J]. J Indian Prosthodont Soc, 2016, 16(1): 8-14.
25 Hormazabal M, Milla P. Resin veneers using injec-ted resin technique to restore aesthetics and function in teeth with color alteration. Case report[J]. Rev Odont Científ Chil, 2023: 37-42.
26 Thilander B. Orthodontic space closure versus implant placement in subjects with missing teeth[J]. J Oral Rehabil, 2008, 35(): 64-71.
27 Hvaring CL, Øgaard B, Birkeland K. Tooth replacements in young adults with severe hypodontia: ortho-dontic space closure, dental implants, and tooth-supported fixed dental prostheses. A follow-up study[J]. Am J Orthod Dentofacial Orthop, 2016, 150(4): 620-626.
28 Oliveira GMS, Ritter AV. Composite resin restorations of permanent incisors with crown fractures[J]. Pediatr Dent, 2009, 31(2): 102-109.
29 Dietschi D. Optimising aesthetics and facilitating clinical application of free-hand bonding using the ‘natural layering concept’ [J]. Br Dent J, 2008, 204(4): 181-185.
30 Eden E, Taviloğlu E. Restoring crown fractures by direct composite layering using transparent strip crowns[J]. Dent Traumatol, 2016, 32(2): 156-160.
31 Terry DA, Powers JM. A predictable resin compo-site injection technique, Part Ⅰ[J]. Dent Today, 2014, 33(4): 96-98, 101.
32 Terry DA, Powers JM, Mehta D, et al. A predictable resin composite injection technique, part 2[J]. Dent Today, 2014, 33(8): 12.
33 Maroulakos G, Maroulakos MP, Tsoukala E, et al. Dental reshaping using the composite resin injection technique after dental trauma and orthodontic treatment[J]. J Dent Child, 2021, 88(2): 144-147.
34 Villafuerte KRV, Obeid AT, de Oliveira NA. Injecta-ble resin technique as a restorative alternative in a cleft lip and palate patient: a case report[J]. Medicina, 2023, 59(5): 849.
35 Milian R, Lefrançois E, Radzikowski A, et al. Pre-orthodontic restorative treatment of microdontia diastema teeth using composite injection technique with a digital workflow-case report[J]. Heliyon, 2023, 9(5): e15843.
36 张隽婧, 张煜强, 范琳, 等. 应用数字化流体树脂注射导板快速关闭正畸后前牙间隙1例[J]. 华西口腔医学杂志, 2023, 41(1): 114-120.
Zhang JJ, Zhang YQ, Fan L, et al. Digital technology for fluid resin injection to close anterior diastema after orthodontic treatment[J]. West China J Stomatol, 2023, 41(1): 114-120.
37 Chen L, Lin WS, Polido WD, et al. Accuracy, reproducibility, and dimensional stability of additively manufactured surgical templates[J]. J Prosthet Dent, 2019, 122(3): 309-314.
38 Kim GB, Lee S, Kim H, et al. Three-dimensional printing: basic principles and applications in medicine and radiology[J]. Korean J Radiol, 2016, 17(2): 182-197.
39 Gross BC, Erkal JL, Lockwood SY, et al. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences[J]. Anal Chem, 2014, 86(7): 3240-3253.
40 Ujiie M, Tsujimoto A, Barkmeier WW, et al. Comparison of occlusal wear between bulk-fill and conventional flowable resin composites[J]. Am J Dent, 2020, 33(2): 74-78.
41 Sumino N, Tsubota K, Takamizawa T, et al. Compari-son of the wear and flexural characteristics of flowa-ble resin composites for posterior lesions[J]. Acta Odontol Scand, 2013, 71(3/4): 820-827.
42 Mehta SB, Francis S, Banerji S. A guided, conservative approach for the management of localized mandibular anterior tooth wear[J]. Dent Update, 2016, 43(2): 106-108, 110-112.
43 Salem MN, Hafez S. Aesthetic management of erosive tooth wear in a young Egyptian swimmer: a case report[J]. Clin Cosmet Investig Dent, 2021, 13: 201-209.
44 Hulac S, Kois JC. Managing the transition to a complex full mouth rehabilitation utilizing injectable composite[J]. J Esthet Restor Dent, 2023, 35(5): 796-802.
45 Ypei Gia NR, Sampaio CS, Higashi C, et al. The injectable resin composite restorative technique: a case report[J]. J Esthet Restor Dent, 2021, 33(3): 404-414.
46 Imai A, Takamizawa T, Sugimura R, et al. Interrelation among the handling, mechanical, and wear properties of the newly developed flowable resin composites[J]. J Mech Behav Biomed Mater, 2019, 89: 72-80.
47 Nair SR, Niranjan NT, Jayasheel A, et al. Comparative evaluation of colour stability and surface hardness of methacrylate based flowable and packable composite-in vitro study[J]. J Clin Diagn Res, 2017, 11(3): ZC51-ZC54.
48 Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites[J]. J Prosthet Dent, 2002, 87(6): 642-649.
49 Bailey O, McGuirk C, Connor CO. Matrix transfer techniques for direct paste composite resins[J]. Br Dent J, 2022, 233(2): 91-98.
[1] 焦明阳,周煜萃,蒋正源,刘雨欣,曲柳. 数字化导板技术在牙髓治疗领域的研究进展[J]. 国际口腔医学杂志, 2024, 51(5): 550-557.
[2] 杨育泽,艾璐莹,张自亮,肖康,毛雨典,吴赟,陈凌. 断冠粘接结合数字化贴面修复在上前牙复杂冠折中的应用1例[J]. 国际口腔医学杂志, 2024, 51(2): 172-175.
[3] 汤芝伟,高莺. 靶向牙髓显微外科技术的应用与进展[J]. 国际口腔医学杂志, 2022, 49(6): 678-683.
[4] 蔡娉娉,卓盈颖,林捷,郑志强. 计算机辅助技术在纤维桩拆除中的应用[J]. 国际口腔医学杂志, 2022, 49(6): 731-736.
[5] 雒琪玥,柳叶语,罗依麟,满毅. 以正中关系为中心、面部美学及修复为导向的数字化无牙颌种植修复1例[J]. 国际口腔医学杂志, 2022, 49(4): 426-431.
[6] 庞瑜,刘显,王了. 数字化导板在埋伏多生牙拔除中的应用[J]. 国际口腔医学杂志, 2022, 49(4): 448-452.
[7] 赵喆,王富,郑秀丽,安娜,陈吉华. 功能载荷下牙移动测量方法的研究进展[J]. 国际口腔医学杂志, 2022, 49(3): 362-366.
[8] 罗恩. 人工智能正颌外科的探索与临床初步应用[J]. 国际口腔医学杂志, 2022, 49(2): 125-131.
[9] 李如意,罗锋,万乾炳. 下颌运动实时记录系统的原理及其应用进展[J]. 国际口腔医学杂志, 2022, 49(2): 182-189.
[10] 钮晔,曾芸婷,曾悦翔,张泽宇,肖立伟. 数字化技术在直丝弓托槽间接粘接中的应用[J]. 国际口腔医学杂志, 2021, 48(4): 491-496.
[11] 刘艺,刘奕. 上颌埋伏阻生尖牙与牙弓及腭部形态的相关性[J]. 国际口腔医学杂志, 2021, 48(2): 243-248.
[12] 赵志河. 数字化正畸中前牙转矩设计的比较[J]. 国际口腔医学杂志, 2021, 48(1): 1-6.
[13] 王奔,许喆桢,韦曦. 数字化微创技术在牙髓根尖周病学中的应用与进展[J]. 国际口腔医学杂志, 2021, 48(1): 110-118.
[14] 王勇. 全口义齿数字化技术分析[J]. 国际口腔医学杂志, 2020, 47(1): 1-9.
[15] 蔡潇潇. 美学区数字化种植策略与流程[J]. 国际口腔医学杂志, 2019, 46(6): 621-630.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] 汪虹虹综述 陈荣敬审校. Herbst 矫治器对成人骨性Ⅱ类错牙合畸形矫治的疗效评价[J]. 国际口腔医学杂志, 2012, 39(6): 801 -804 .
[2] 罗玉综述 杨健审校. 根尖工作宽度的研究进展[J]. 国际口腔医学杂志, 2012, 39(6): 834 -837 .
[3] 王镶珊综述 胡荣党审校. 上颌埋伏阻生中切牙的治疗[J]. 国际口腔医学杂志, 2010, 37(02): 240 -240～243 .
[4] 陈宇综述 林正梅审校. 牙隐裂的临床研究[J]. 国际口腔医学杂志, 2009, 36(3): 355 -357，360 .
[5] 王绍义综述 蒋欣泉, 张志愿审校. 口腔骨组织工程研究进展[J]. 国际口腔医学杂志, 2008, 35(4): 433 -433～436 .
[6] 陈念梅,林珊,. 正畸治疗后软组织面形的预测方法[J]. 国际口腔医学杂志, 2007, 34(05): 390 -392 .
[7] 李晓岚综述 凌均棨审校. 激光荧光法诊断早期龋的研究进展及评价[J]. 国际口腔医学杂志, 2009, 36(3): 297 -299，302 .
[8] 邹静1 秦满2 汪俊3 黄华4 林居红5 周学东. 儿童常见牙病与错牙合畸形[J]. 国际口腔医学杂志, 2016, 43(6): 619 -623 .
[9] 许庆安,樊明文. 非器械根管治疗与多声波超洁净系统[J]. 国际口腔医学杂志, 2019, 46(5): 522 -525 .