composite resin, finishing and polishing, surface roughness, profilometer,"/> 树脂修整抛光技术的研究进展

国际口腔医学杂志 ›› 2008, Vol. 35 ›› Issue (1): 44-47.

• 综述 • 上一篇    下一篇

树脂修整抛光技术的研究进展

王丹凤综述 宋光泰审校   

  1. 武汉大学口腔医院儿童牙科 湖北 武汉 430079
  • 收稿日期:2007-07-09 修回日期:2007-10-07 出版日期:2008-01-20 发布日期:2008-01-20
  • 通讯作者: 宋光

Resear ch progression of finishing and polishing technique of composite resin

WANG Dan - feng, SONG Guang- tai   

  1. Dept. of Pediatric Dentistry, Stomatological Hospital, Wuhan University, Wuhan 43
  • Received:2007-07-09 Revised:2007-10-07 Online:2008-01-20 Published:2008-01-20
  • Contact: SONG Guang- tai

摘要:

由于复合树脂性能的不断改进及酸蚀黏结技术的发展,树脂直接充填技术在临床上应用日趋广泛,固化后对其进行合理的修整抛光具有重要的临床意义。良好的修整与抛光能够改善树脂修复体的质量和延长使用时间,可以有效防止其表面着色、菌斑沉积、继发龋和牙龈炎的发生。为此,本文对修整抛光方法与光固化复合树脂表面粗糙度的关系,影响抛光效果的相关因素以及观察抛光效果的方法及评价标准作一综述,为临床工作提供理论指导。

关键词: 复合树脂, 修整与抛光, 表面粗糙度, 轮廓测定仪

Abstract:

The property of composite resin and etching technique have been improving progressively and adhesive dentistry has evolved quickly, as a result, direct adhesive restorations are used increasingly in clinic. It is generally agreed that appropriate finishing and polishing procedures play an important role in improving the quality and longevity of resin composite restorations. Meanwhile, some clinical problems such as gingival irritation, surface staining, plaque accumulation and secondary caries can be avoided efficiently. Accordingly, this review mainly formulates the relationship between the methods of finishing and polishing and surface roughness of resin composite, relative factors that influences finishing and polishing, criteria that evaluates the effect of finishing and polishing.

Key words: composite resin')">composite resin, finishing and polishing, surface roughness, profilometer

[1] 薛晶, 杨静. 基于循证实践的Ⅱ类洞复合树脂修复的操作要点[J]. 国际口腔医学杂志, 2023, 50(4): 375-387.
[2] 王路明,曹潇,仵琳悦,李蕴聪,雷波,牛林. 掺锌生物活性玻璃纳米颗粒对复合树脂力学性能影响的实验研究[J]. 国际口腔医学杂志, 2022, 49(4): 404-411.
[3] 张静怡,李丹薇,孙宇,雷雅燕,刘涛,龚瑜. 复合树脂及复合体对成骨细胞毒性及成骨向分化的影响[J]. 国际口腔医学杂志, 2022, 49(4): 412-419.
[4] 薛晶. 邻面成形系统的发展和临床应用[J]. 国际口腔医学杂志, 2020, 47(6): 621-626.
[5] 梁继超, 王芬, 张正华, 庞富升, 侯梅娟, 张凤英. 正畸分牙辅助邻面龋充填治疗的临床疗效观察[J]. 国际口腔医学杂志, 2017, 44(4): 440-444.
[6] 姚陈敏, 周丽群, 黄翠. 前牙磨耗牙色修复材料的选择[J]. 国际口腔医学杂志, 2017, 44(3): 363-367.
[7] 武芳艳,李明菲,孟翔峰. 铸瓷全冠修复体树脂粘接效果的3年临床评估[J]. 国际口腔医学杂志, 2016, 43(6): 658-660.
[8] 方力 刘源 杨燃 邹静. 树脂充填前后唾液中变异链球菌的变化[J]. 国际口腔医学杂志, 2015, 42(1): 28-30.
[9] 王东杰1 吴兵2 陈晓红1. 光固化复合树脂前牙微创美学修复的临床体会[J]. 国际口腔医学杂志, 2014, 41(2): 137-139.
[10] 王素苹 程磊 周学东. 复合树脂纳米抗菌成分的研究进展[J]. 国际口腔医学杂志, 2013, 40(6): 750-753.
[11] 邱海燕1 张倩2. 纤维增强复合树脂粘接桥的研究进展[J]. 国际口腔医学杂志, 2013, 40(3): 395-398.
[12] 叶韵瑶综述 林正梅审校. 低聚合收缩复合树脂的性能及其应用[J]. 国际口腔医学杂志, 2012, 39(4): 506-509.
[13] 苏伟珠1 王浙君1 撒悦1综述 王贻宁1,2审校. 漂白剂对复合树脂的影响[J]. 国际口腔医学杂志, 2012, 39(4): 537-539.
[14] 侯乾乾综述 高益鸣审校. 预成纤维桩的临床应用研究进展[J]. 国际口腔医学杂志, 2012, 39(4): 554-556.
[15] 张丽丽邢文忠梁珊珊综述蒋滔审校. 复合树脂外源性染色的影响因素[J]. 国际口腔医学杂志, 2012, 39(2): 198-201.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王昆润. 修补颌骨缺损的新型生物学相容材料[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 陆加梅. 不可复性关节盘移位患者术前张口度与关节镜术后疗效的相关性[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 王昆润. 咀嚼口香糖对牙周组织微循环的影响[J]. 国际口腔医学杂志, 1999, 26(06): .
[4] 宋红. 青少年牙周炎外周血分叶核粒细胞的趋化功能[J]. 国际口腔医学杂志, 1999, 26(06): .
[5] 高卫民,李幸红. 发达国家牙医学院口腔种植学教学现状[J]. 国际口腔医学杂志, 1999, 26(06): .
[6] 侯锐. 正畸患者釉白斑损害的纵向激光荧光研究[J]. 国际口腔医学杂志, 1999, 26(05): .
[7] 轩东英. 不同赋形剂对氢氧化钙抗菌效果的影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[8] 房兵. 唇腭裂新生儿前颌骨矫正方法及对上颌骨生长发育的影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[9] 杨美祥. 前牙厚度在预测上下颌牙量协调性中的作用[J]. 国际口腔医学杂志, 1999, 26(04): .
[10] 赵艳丽. 手术刀、电凝、CO_2和KTP激光对大鼠舌部创口的作用[J]. 国际口腔医学杂志, 1999, 26(04): .