Int J Stomatol

Inter J Stomatol ›› 2016, Vol. 43 ›› Issue (3): 278-282.doi: 10.7518/gjkq.2016.03.006

Previous Articles     Next Articles

Comparative study on nickel release of two dental nickel alloys in mouth wash

Tian Taoran, Zhang Yanggen, Huang Xinqi, Li Longbiao, Zhang Xinxi, Zhu Zhuoli   

  1. State Key Laboratory of Oral Diseases, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China) This study was supported by the Science Foudation of Sichuan Medical Association(S15061).
  • Received:2015-12-01 Revised:2016-02-13 Online:2016-05-01 Published:2016-05-01

RichHTML

6

PDF (PC)

440

Abstract: Objective This study aims to investigate the release of nickel from two nickel alloy specimens for dental prosthesis in a commercial mouth wash through a constant immersion experiment. Methods Standard samples were casted from two different alloys and ground to achieve the same roughness. For our experimental group, one-half of the samples are immersed in a solution composed of artificial saliva and commercial mouthwash. For our control group, the other half of the samples are placed in a solution containing artificial saliva and distilled water. This procedure is performed at (37±1) °C for 96 h. The amount of Ni ion released after the 96 h immersion test and the changes in the surfaces of the alloys asreceived and upon immersion are then determined by using an inductively coupled plasma optical emission spectrometer(ICP-OES) and a scanning electron microscope. Results The amount of released Ni ion is below the minimum detection limit of ICP-OES in the blank solution without the alloys. More ions are released from the Ni-casted alloy than from the Ni-Cr porcelain fused to a metal in the experimental group and the control group. The ions released from each alloy are also significantly different in the two solutions. Conclusion The tested commercial mouthwash accelerates the release of Ni ion from the two nickel alloys. This phenomenon is more significant in the nickel-casted alloy than in the other alloy type.

Key words: mouth wash, dental alloy, immersion, nickel, mouth wash, dental alloy, immersion, nickel

CLC Number: 

  • R 783

TrendMD: 
[1] Wataha JC, Drury JL, Chung WO. Nickel alloys in the oral environment[J]. Expert Rev Med Devices, 2013, 10(4):519-539.
[2] Muris J, Goossens A, Gon?alo M, et al. Sensitization to palladium and nickel in Europe and the relationship with oral disease and dental alloys[J]. Contact Derm, 2015, 72(5):286-296.
[3] Büyük?ztürk S, Gelincik A, ünal D, et al. Oral nickel exposure may induce TypeⅠhypersensitivity reaction in nickel-sensitized subjects[J]. Int Immunopharmacol, 2015, 26(1):92-96.
[4] Pazzini CA, Marques LS, Ramos-Jorge ML, et al. Longitudinal assessment of periodontal status in patients with nickel allergy treated with conventional and nickel-free braces[J]. Angle Orthod, 2012, 82(4):653-657.
[5] Iijima M, Yuasa T, Endo K, et al. Corrosion behavior of ion implanted nickel-titanium orthodontic wire in fluoride mouth rinse solutions[J]. Dent Mater J, 2010, 29(1):53-58.
[6] Robin A, Meirelis JP. Influence of fluoride concentration and pH on corrosion behavior of Ti-6Al-4V and Ti-23Ta alloys in artificial saliva[J]. Mater Corrosion, 2007(3):173-180.
[7] Aung EE, Ueno M, Zaitsu T, et al. Effectiveness of three oral hygiene regimens on oral malodor reduction: a randomized clinical trial[J]. Trials, 2015, 16:31.
[8] Ragsdale SW. Nickel biochemistry[J]. Curr Opin Chem Biol, 1998, 2(2):208-215.
[9] Wataha JC, O’Dell NL, Singh BB, et al. Relating nickel-induced tissue inflammation to nickel release in vivo[J]. J Biomed Mater Res, 2001, 58(5):537-544.
[10] Elshahawy WM, Watanabe I, Kramer P. In vitro cytotoxicity evaluation of elemental ions released from different prosthodontic materials[J]. Dent Mater, 2009, 25(12):1551-1555.
[11] Thyssen JP, Menné T. Metal allergy—a review on exposures, penetration, genetics, prevalence, and clinical implications[J]. Chem Res Toxicol, 2010, 23(2):309-318.
[12] Loch J, ?ukaszczyk A, Augustyn-Pieni??ek J, et al. Electrochemical behaviour of Co-Cr and Ni-Cr dental alloys[J]. Solid State Phenomena, 2015(227):451-454.
[13] Esquivel-Upshaw JF, Dieng FY, Clark AE, et al. Surface degradation of dental ceramics as a function of environmental pH[J]. J Dent Res, 2013, 92(5):467-471.
[14] Mutlu-Sagesen L, Ergun G, Karabulut E. Ion release from metal-ceramic alloys in three different media[J]. Dent Mater J, 2011, 30(5):598-610.
[15] Benyahia H, Ebntouhami M, Forsal I, et al. Corrosion resistance of NiTi in fluoride and acid environments[J]. Int Orthod, 2009, 7(4):322-334.
[16] Knutson KJ, Berzins DW. Corrosion of orthodontic temporary anchorage devices[J]. Eur J Orthod, 2013, 35(4):500-506.
[1] Zhang Qilin,Li Jun,Li Shuhui. Research progress on nickel-titanium instruments for root canal preparation machine [J]. Int J Stomatol, 2022, 49(6): 663-669.
[2] Ji Xiao,Jing Fangqi,Li Ya,Xue Jing. Data simulation optimization of root canal preparation sequence [J]. Int J Stomatol, 2022, 49(1): 37-47.
[3] Wang Hongyuan,He Lu,Zhang Ru,Zheng Deqiang,Li Hong. Comparative study on the shaping ability of thermally treated continuous rotating nickel-titanium systems for severely curved simulated canals [J]. Int J Stomatol, 2021, 48(3): 297-304.
[4] Li Zongli, Peng Bin.. Comparative evaluation of shaping ability of HyFlex, S3, K3XF and ProTaper in simulated curved canals [J]. Inter J Stomatol, 2017, 44(3): 256-260.
[5] Yang Yinjie1, Hou Benxiang1, Hou Xiaomei2. Mechanical properties and shaping ability of R-phase heat treatment nickel-titanium instruments [J]. Inter J Stomatol, 2017, 44(2): 189-194.
[6] Cai Jingjing, Ge Jiuyu.. Effects of different media on the fatigue resistance of nickel-titanium instruments [J]. Inter J Stomatol, 2015, 42(6): 739-743.
[7] Liu Zhaohui, Ling Junqi. Self-adjusting file for root canal preparation [J]. Inter J Stomatol, 2014, 41(3): 320-323.
[8] Guo Yongjuan, Liu Yi. The impact of nickel ions released from orthodontic fixed appliances on the whole organism [J]. Inter J Stomatol, 2013, 40(6): 758-759.
[9] Liu Siming, Hu Tao. Application of a new nickel-titanium instrument-Twisted Files [J]. Inter J Stomatol, 2013, 40(2): 185-187.
[10] Li Hua, Hu Min.. Research progress on the biosafety of nickel containing alloys used in orthodontics [J]. Inter J Stomatol, 2012, 39(2): 233-236.
[11] Wang Qiang1, Na Ying2, Feng Cuijuan2, Zhan Desong1, Zhang Yang2. . Effect of oxidation on the hydrophilic property of the medical nickel titanium alloy [J]. Inter J Stomatol, 2011, 38(5): 506-508.
[12] Wang Rongjie, Zeng Rongsheng.. Research progress on jaw distractors [J]. Inter J Stomatol, 2011, 38(4): 463-466.
[13] ZHAO Yao, LIU Jia-jun, MENG Yu-kun.. Research progress on corrosion behavior of dental alloys [J]. Inter J Stomatol, 2011, 38(3): 339-342.
[14] SUN Wei, HOU Ben-xiang.. Analysis of the factors influence the fracture about nickel-titanium rotary instruments [J]. Inter J Stomatol, 2010, 37(6): 688-690.
[15] CHU Feng-qing, WANG Guo-ping. Research progress of study methods on corrosion of dental alloy [J]. Inter J Stomatol, 2010, 37(02): 189-189～191,195.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] . [J]. Foreign Med Sci: Stomatol, 1999, 26(06): .
[2] . [J]. Foreign Med Sci: Stomatol, 1999, 26(05): .
[3] . [J]. Foreign Med Sci: Stomatol, 1999, 26(05): .
[4] . [J]. Foreign Med Sci: Stomatol, 1999, 26(05): .
[5] . [J]. Foreign Med Sci: Stomatol, 1999, 26(05): .
[6] . [J]. Foreign Med Sci: Stomatol, 1999, 26(04): .
[7] . [J]. Foreign Med Sci: Stomatol, 2005, 32(06): 458 -460 .
[8] . [J]. Foreign Med Sci: Stomatol, 2005, 32(06): 452 -454 .
[9] . [J]. Inter J Stomatol, 2008, 35(S1): .
[10] . [J]. Inter J Stomatol, 2008, 35(S1): .