国际口腔医学杂志 ›› 2019, Vol. 46 ›› Issue (3): 361-366.doi: 10.7518/gjkq.2019040

• 综述 • 上一篇    下一篇

Er:YAG和Nd:YAG激光对牙本质与瓷修复体粘接面粘接强度影响的研究进展

秦娇娇,焦珊,王成坤()   

  1. 吉林大学口腔医院牙体牙髓病科 长春 130021
  • 收稿日期:2018-08-20 修回日期:2019-02-18 出版日期:2019-05-01 发布日期:2019-06-05
  • 通讯作者: 王成坤 E-mail:wck1964@163.com
  • 作者简介:秦娇娇,硕士,Email:qinjiao0529@sina.com
  • 基金资助:
    吉林省科学技术厅科技发展计划项目(20140414010GH)

Advances in research on the effects of Er:YAG and Nd:YAG lasers on the bonding strength of the bonding surface between dentine and porcelain prosthesis

Jiaojiao Qin,Shan Jiao,Chengkun Wang()   

  1. Dept. of Conservative Dentistry and Endodontics, Hospital of Stomatology, Jilin University, Changchun 130021, China
  • Received:2018-08-20 Revised:2019-02-18 Online:2019-05-01 Published:2019-06-05
  • Contact: Chengkun Wang E-mail:wck1964@163.com
  • Supported by:
    This study was supported by Science and Technology Development Project of Jilin Science and Technology Department(20140414010GH)

摘要:

近年来,计算机辅助设计和计算机辅助制造(CAD/CAM)系统被引入口腔领域,这使得全瓷修复体的制作效率大大提高,应用也愈加广泛。全瓷修复体的远期使用效果与其在牙齿表面的粘接性能有着密切的关联,但目前对于全瓷修复体粘接面和牙本质表面粘接强度方面的研究还有待深入。现今,Er:YAG和Nd:YAG激光在口腔领域各方面发展迅速,在牙体硬组织和陶瓷表面处理方面的研究和应用也随之增多,但其对粘接强度影响方面的研究尚无定论。本文就Er:YAG和Nd:YAG激光对牙本质与瓷修复体粘接面粘接强度影响的研究进展作一综述。

关键词: Er:YAG激光, Nd:YAG激光, 牙本质, 瓷, 粘接强度

Abstract:

Computer-aided designs and computer-aided manufacturing systems have been introduced to stomatology and have greatly improved the production efficiency and application of all-porcelain prosthesis. The long-term use effect of all-porcelain prosthesis is closely related to the bonding performance on tooth surfaces, but the bonding strength of the bonding surface of all-porcelain prosthesis and dentine remains to be further studied. Er:YAG and Nd:YAG lasers have been developed in various aspects of the oral cavity. Dental hard tissue and ceramic surface treatments have also been widely explored, but no uniform conclusion on the influence of bonding strength has been obtained. In this study, research progress on the influences of Er:YAG and Nd:YAG lasers on the bonding strength of the bonding surface between dentine and porcelain prosthesis is reviewed.

Key words: Er:YAG laser, Nd:YAG laser, dentine, porcelain, bonding strength

中图分类号: 

  • R783.2
[1] Yavuz T, Özyılmaz ÖY, Dilber E , et al. Effect of different surface treatments on porcelain-resin bond strength[J]. J Prosthodont, 2017,26(5):446-454.
doi: 10.1111/jopr.2017.26.issue-5
[2] Bahrololoomi Z, Razavi F, Soleymani AA . Comparison of micro-leakage from resin-modified glass ionomer restorations in cavities prepared by Er:YAG (erbium-doped yttrium aluminum garnet) laser and conventional method in primary teeth[J]. J Lasers Med Sci, 2014,5(4):183-187.
[3] 吕静雅, 郭亚娟, 蔡兴伟 . Er:YAG激光应用于牙体硬组织的研究进展[J]. 口腔颌面修复学杂志, 2017,18(1):60-64.
Lü JY, Guo YJ, Cai XW . Application of Er:YAG laser on dental hard tissues[J]. Chin J Prosthodont, 2017,18(1):60-64.
[4] Tachibana A, Marques MM, Soler JM , et al. Erbium, chromium: yttrium scandium gallium garnet laser for caries removal: influence on bonding of a self-etching adhesive system[J]. Lasers Med Sci, 2008,23(4):435-441.
doi: 10.1007/s10103-007-0503-5
[5] Farmakis ET, Kozyrakis K, Khabbaz MG , et al. In vitro evaluation of dentin tubule occlusion by denshield and neodymium-doped yttrium-aluminum-garnet laser irradiation[J]. J Endod, 2012,38(5):662-666.
doi: 10.1016/j.joen.2012.01.019
[6] Aoki A, Sasaki KM, Watanabe H , et al. Lasers in nonsurgical periodontal therapy[J]. Periodontol 2000, 2004,36:59-97.
doi: 10.1111/prd.2004.36.issue-1
[7] Moritz A, Jakolitsch S, Goharkhay K , et al. Morphologic changes correlating to different sensitivities of Escherichia coli and Enterococcus faecalis to Nd: YAG laser irradiation through dentin[J]. Lasers Surg Med, 2000,26(3):250-261.
doi: 10.1002/(ISSN)1096-9101
[8] Kara O, Kara HB, Tobi ES , et al. Effect of various lasers on the bond strength of two zirconia ceramics[J]. Photomed Laser Surg, 2015,33(2):69-76.
doi: 10.1089/pho.2014.3841
[9] 金地, 姚江武 . 数字化口腔修复(28)——激光脱色与CAD/CAM全瓷冠美学修复(附病例报告)[J]. 临床口腔医学杂志, 2017,33(2):116-118.
Jin D, Yao JW . Digital restorative dentistry and prosthodontics (28)—laser decoloration and esthetic restoration with CAD/CAM all ceramic crown (a case report)[J]. J Clin Stomatol, 2017,33(2):116-118.
[10] Xiao SM, Liang KN, Liu HL , et al. Effect of water-cooled Nd:YAG laser on dentinal tubule occlusion in vitro[J]. Photomed Laser Surg, 2017,35(2):98-104.
doi: 10.1089/pho.2016.4169
[11] Zhang S, Chen T, Ge LH . Scanning electron microscopy study of cavity preparation in deciduous teeth using the Er:YAG laser with different powers[J]. Lasers Med Sci, 2012,27(1):141-144.
doi: 10.1007/s10103-010-0854-1
[12] Ramos TM , Ramos-Oliveira TM, de Freitas PM , et al. Effects of Er:YAG and Er, Cr:YSGG laser irradiation on the adhesion to eroded dentin[J]. Lasers Med Sci, 2015,30(1):17-26.
doi: 10.1007/s10103-013-1321-6
[13] Russo DS, Buti J, Giachetti L . An in vitro comparison of bonding effectiveness of different adhesive strategies on erbium: yttrium-alluminum-garnet laser irradiated dentin[J]. Open J Stomatol, 2016,6(1):1-11.
doi: 10.4236/ojst.2016.61001
[14] 宋丹丹, 邱大鹏, 方慧敏 , 等. Er:YAG激光处理对牙本质与树脂粘结强度的影响[J]. 口腔医学研究, 2017,33(6):629-632.
Song DD, Qiu DP, Fang HM , et al. Effect of Er:YAG laser treatment on dentin surface and bonding strength[J]. J Oral Sci Res, 2017,33(6):629-632.
[15] 李瑞青, 赵彬, 闫慧 , 等. Er:YAG激光对牙本质与瓷块间粘接强度影响研究[J]. 中国实用口腔科杂志, 2012,5(11):676-678.
Li RQ, Zhao B, Yan H , et al. Effects of Er:YAG laser on bond strength between dentin and blocks[J]. Chin J Pract Stomatol, 2012,5(11):676-678.
[16] Kuwana APDS , Firoozmand LM, de Araújo MAM . Evaluation of the shear bond strength of a composite resin in sound, demineralized and hypermineralized bovine dentin after irradiation with Er:YAG and Nd: YAG lasers, employing a self-etching adhesive system[J]. J Laser Appl, 2010,22(3):99-105.
doi: 10.2351/1.3493489
[17] 余少华, 吴秀丽, 叶丽君 , 等. Er:YAG激光对牙本质结构、成分及髓腔温度的影响[J]. 牙体牙髓牙周病学杂志, 2016,26(6):358-363.
Yu SH, Wu XL, Ye LJ , et al. The effects of Er:YAG laser irradiation on dentin structure, composition and the temperature of dental pulp cavity[J]. Chin J Conserv Dent, 2016,26(6):358-363.
[18] Gurgan S, Kiremitci A, Cakir FY , et al. Shear bond strength of composite bonded to erbium: yttrium-aluminum-garnet laser-prepared dentin[J]. Lasers Med Sci, 2009,24(1):117-122.
doi: 10.1007/s10103-007-0532-0
[19] 宋丹丹, 方慧敏, 曹阳 , 等. Er:YAG激光预备对牙釉质表面性能及树脂粘结强度的影响[J]. 口腔医学研究, 2017,33(1):38-41.
Song DD, Fang HM, Cao Y , et al. Influence of Er: YAG laser treatment on enamel surface and shear bond strength of resin[J]. J Oral Sci Res, 2017,33(1):38-41.
[20] Hossain M, Nakamura Y, Tamaki Y , et al. Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er, Cr:YSGG laser irradiation in vitro[J]. J Oral Rehabil, 2003,30(5):515-521.
doi: 10.1046/j.1365-2842.2003.01113.x
[21] Attrill DC, Davies RM, King TA , et al. Thermal effects of the Er:YAG laser on a simulated dental pulp: a quantitative evaluation of the effects of a water spray[J]. J Dent, 2004,32(1):35-40.
[22] Maeda FA, Fukushima KA, Tedesco TK , et al. Effect of erosive challenge and Nd:YAG laser irradiation on bond strength of adhesive systems to dentin[J]. Int J Adhes Adhes, 2016,64:60-64.
doi: 10.1016/j.ijadhadh.2015.09.008
[23] Van Landuyt KL, Snauwaert J, De Munck J , et al. Systematic review of the chemical composition of contemporary dental adhesives[J]. Biomaterials, 2007,28(26):3757-3785.
doi: 10.1016/j.biomaterials.2007.04.044
[24] Ataol AS, Ergun G . Effects of surface treatments on repair bond strength of a new CAD/CAM ZLS glass ceramic and two different types of CAD/CAM ceramics[J]. J Oral Sci, 2018,60(2):201-211.
doi: 10.2334/josnusd.17-0109
[25] Alakus Sabuncuoglu F, Erturk E . Shear bond strength of brackets bonded to porcelain surface: in vitro study[J]. J Istanb Univ Fac Dent, 2016,50(1):9-18.
[26] Arami S, Tabatabae MH, Namdar SF , et al. Effects of different lasers and particle abrasion on surface characteristics of zirconia ceramics[J]. J Dent (Tehran), 2014,11(2):233-241.
[27] da Silva Ferreira S, Hanashiro FS, de Souza-Zaroni WC , et al. Influence of aluminum oxide sandblasting associated with Nd:YAG or Er:YAG lasers on shear bond strength of a feldspathic ceramic to resin cements[J]. Photomed Laser Surg, 2010,28(4):471-475.
doi: 10.1089/pho.2009.2528
[28] Aksakalli S, Ileri Z, Yavuz T , et al. Porcelain laminate veneer conditioning for orthodontic bonding: SEM-EDX analysis[J]. Lasers Med Sci, 2015,30(7):1829-1834.
doi: 10.1007/s10103-014-1682-5
[29] Poosti M, Jahanbin A, Mahdavi P , et al. Porcelain conditioning with Nd:YAG and Er:YAG laser for bracket bonding in orthodontics[J]. Lasers Med Sci, 2012,27(2):321-324.
doi: 10.1007/s10103-010-0878-6
[30] Akin H, Tugut F, Akin GE , et al. Effect of Er: YAG laser application on the shear bond strength and microleakage between resin cements and Y-TZP ceramics[J]. Lasers Med Sci, 2012,27(2):333-338.
doi: 10.1007/s10103-011-0883-4
[31] Akova T, Yoldas O, Toroglu MS , et al. Porcelain surface treatment by laser for bracket-porcelain bonding[J]. Am J Orthod Dentofacial Orthop, 2005,128(5):630-637.
doi: 10.1016/j.ajodo.2004.02.021
[32] Yilanci H, Yildirim ZB, Ramoglu SI . Intrapulpal temperature increase during Er:YAG laser-aided debonding of ceramic brackets[J]. Photomed Laser Surg, 2017,35(4):217-222.
doi: 10.1089/pho.2016.4198
[33] 台银霞, 朱宪春, 闫森 , 等. 不同处理方法对瓷表面微观形貌的影响[J]. 华西口腔医学杂志, 2013,31(1):57-60.
doi: 10.7518/hxkq.2013.01.015
Tai YX, Zhu XC, Yan S , et al. Influence of different surface treatments on porcelain surface topography[J]. West Chin J Stomatol, 2013,31(1):57-60.
doi: 10.7518/hxkq.2013.01.015
[1] 钱慧芬,林云红,吴美莹,代自超,李星星. 瓷层厚度和变色基底对瓷贴面修复四环素牙光学性能的影响[J]. 国际口腔医学杂志, 2020, 47(4): 413-417.
[2] 张凯莹,房付春,吴补领. 非编码RNA在牙源性干细胞成牙本质向分化中作用的研究进展[J]. 国际口腔医学杂志, 2019, 46(5): 540-545.
[3] 于婉琦,周延民,赵静辉. 口腔种植体新材料的研究现状[J]. 国际口腔医学杂志, 2019, 46(4): 488-496.
[4] 侯晔坡,高杰. Er:YAG激光照射对牙科陶瓷材料粘接影响的研究进展[J]. 国际口腔医学杂志, 2019, 46(1): 68-72.
[5] 靳志亨,李清. 核瓷和饰瓷厚度变化对全瓷修复体抗弯强度影响的研究进展[J]. 国际口腔医学杂志, 2019, 46(1): 94-98.
[6] 谭欣,于海洋. 模拟髓腔压力在牙本质粘接强度研究中的应用[J]. 国际口腔医学杂志, 2018, 45(6): 723-727.
[7] 陈燕活, 安少锋, 高燕. 硅酸钙类盖髓剂生物学性能的研究进展[J]. 国际口腔医学杂志, 2018, 45(4): 459-464.
[8] 魏煦, 杨芸, 张凯, 孙方方. 热压铸瓷面瓷贴面的临床效果评估[J]. 国际口腔医学杂志, 2017, 44(6): 696-700.
[9] 丁宏, 陈济芬, 吴建勇. 不同粘接剂对烤瓷瓷面与金属托槽间剪切强度影响的体外研究[J]. 国际口腔医学杂志, 2017, 44(4): 430-432.
[10] 廖文婷, 李彦. 半胱氨酸组织蛋白酶对牙本质粘接耐久性的影响[J]. 国际口腔医学杂志, 2017, 44(3): 340-343.
[11] 张雅蓉, 刘洋, 张玲, 于海洋. 不同切端设计的上前牙瓷贴面受载能力的定量研究[J]. 国际口腔医学杂志, 2017, 44(3): 301-303.
[12] 姚陈敏, 周丽群, 黄翠. 前牙磨耗牙色修复材料的选择[J]. 国际口腔医学杂志, 2017, 44(3): 363-367.
[13] 陈俊宇,万乾炳. 全瓷粘接桥的临床研究进展[J]. 国际口腔医学杂志, 2016, 43(6): 690-694.
[14] 武芳艳,李明菲,孟翔峰. 铸瓷全冠修复体树脂粘接效果的3年临床评估[J]. 国际口腔医学杂志, 2016, 43(6): 658-660.
[15] 原小慧,刘杰. 微弧氧化技术提高钛-瓷结合强度的研究进展[J]. 国际口腔医学杂志, 2016, 43(6): 695-699.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张京剧. 青年期至中年期颅面复合体变化的头影测量研究[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 刘玲. 镍铬合金中铍对可铸造性和陶瓷金属结合力的影响[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 王昆润. 在种植体上制作固定义齿以后下颌骨密度的动态变化[J]. 国际口腔医学杂志, 1999, 26(06): .
[4] 王昆润. 重型颌面部炎症死亡和康复病例的实验室检查指标比较[J]. 国际口腔医学杂志, 1999, 26(06): .
[5] 温秀杰. 氟化物对牙本质脱矿抑制作用的体外实验研究[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 杨春惠. 耳颞神经在颞颌关节周围的分布[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 王昆润. 牙周炎加重期应选用何种抗生素[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 杨儒壮 孙宏晨 欧阳喈. 纳米级高分子支架材料在组织工程中的研究进展[J]. 国际口腔医学杂志, 2004, 31(02): 126 -128 .
[9] 严超然,李龙江. 肿瘤靶向药物载体系统的研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .
[10] 沈末伦,华成舸. 上皮间质转化及其调控基因Twist在肿瘤侵袭转移中的作用[J]. 国际口腔医学杂志, 2008, 35(S1): .