瓷贴面修复的研究现状及临床应用

doi:10.7518/gjkq.2017.01.001

摘要/Abstract

摘要： 随着生活水平及审美意识的提高,贴面作为一种兼顾美学与微创的修复技术,近年来得到了越来越多的患者和修复医生的青睐。本文就贴面修复的材料、适应证、临床效果和修复技术各方面的研究现状作一综述,以期为临床工作提供参考。

Abstract: With the improvement of living standards and increasing esthetic demands of patients, veneer has become widely accepted by both the patients and the prosthodontists as its minimal invasion and optimal esthetic characteristics. This paper reviewed the research progress on materials, indications, clinical results and techniques of veneers, aiming to provide references for their clinical applications.

Key words: esthetic prosthodontics, veneer, clinical outcome, tooth preparation, adhesion

中图分类号:

R783.3

孟玉坤, 宗弋. 瓷贴面修复的研究现状及临床应用[J]. 国际口腔医学杂志, 2017, 44(1): 1-10.

Meng Yukun, Zong Yi. Research status and clinical application of ceramic veneer restorations[J]. Inter J Stomatol, 2017, 44(1): 1-10.

参考文献

[1] Dietschi D, Devigus A. Prefabricated composite veneers: historical perspectives, indications and clinical application[J]. Eur J Esthet Dent, 2011, 6(2): 178-187.
[2] Christensen GJ. Direct restorative materials. What goes where[J]. J Am Dent Assoc, 2003, 134(10): 1395-1397.
[3] Rochette AL. A ceramic restoration bonded by etched enamel and resin for fractured incisors[J]. J Prosthet Dent, 1975, 33(3):287-293.
[4] Calamia JR. Etched porcelain facial veneers: a new treatment modality based on scientific and clinical evidence[J]. N Y J Dent, 1983, 53(6):255-259.
[5] Horn HR. Porcelain laminate veneers bonded to etched enamel[J]. Dent Clin North Am, 1983, 27(4):671- 684.
[6] Fons-Font A, Solá-Ruíz MF, Granell-Ruíz M, et al. Choice of ceramic for use in treatments with porce-lain laminate veneers[J]. Med Oral Patol Oral Cir Bucal, 2006, 11(3):E297-E302.
[7] Edelhoff D, Sorensen JA. Tooth structure removal associated with various preparation designs for ante-rior teeth[J]. J Prosthet Dent, 2002, 87(5):503-509.
[8] Layton DM, Clarke M. A systematic review and meta-analysis of the survival of non-feldspathic porcelain veneers over 5 and 10 years[J]. Int J Prosthodont, 2013, 26(2):111-124.
[9] Morimoto S, Albanesi RB, Sesma N, et al. Main clinical outcomes of feldspathic porcelain and glass-ceramic laminate veneers: A systematic review and meta-analysis of survival and com-plication rates[J]. Int J Prosthodont, 2016, 29(1):38-49.
[10] 冯翠娟, 艾红军. Meta-分析法研究贴面修复在国内的临床应用现状[J]. 中国医科大学学报, 2002, 31(5):368-370. Feng CJ, Ai HJ. Study on the clinical application of Meta-analysis method in the domestic clinical app-lication[J]. J Chin Med Univ, 2002, 31(5):368-370.
[11] 刘晶莹, 孟斌. 试用meta分析研究牙体预备方法与瓷贴面成功率的关系[J]. 口腔医学研究, 2012, 28 (6):605-608. Liu JY, Meng B. Meta-analysis of achievement rates of porcetain laminate restoration with different preparation designs[J]. J Oral Sci Res, 2012, 28(6): 605-608.
[12] 李中杰, 谢翠柳, 孟玉坤. 贴面修复临床效果的相关因素研究[J]. 国际口腔医学杂志, 2013, 40(4): 489-492. Li ZJ, Xie CL, Meng YK. Research on factors re-lated to clinical effects of veneer restorations[J]. Int J Stomatol, 2013, 40(4):489-492.
[13] Petridis HP, Zekeridou A, Malliari M, et al. Survival of ceramic veneers made of different materials after a minimum follow-up period of five years: a sys-tematic review and meta-analysis[J]. Eur J Esthet Dent, 2012, 7(2):138-152.
[14] Nattress BR, Youngson CC, Patterson CJ, et al. An in vitro assessment of tooth preparation for porcelain veneer restorations[J]. J Dent, 1995, 23(3):165-170.
[15] McLaren EA, Whiteman YY. Ceramics: rationale for material selection[J]. Compend Contin Educ Dent, 2010, 31(9):666-668, 670, 672, 680, 700.
[16] Cherukara GP, Davis GR, Seymour KG, et al. Dentin exposure in tooth preparations for porcelain veneers: a pilot study[J]. J Prosthet Dent, 2005, 94(5):414- 420.
[17] 李彦, 魏素华. 三种烤瓷贴面牙体预备的临床修复效果评价[J]. 中山医科大学学报, 2000, 21(4):293- 295. Li Y, Wei SH. Evaluation of clinical effect of three kinds of porcelain fused to the surface tooth prepara-tion[J]. Acad J Sun Yat-Sen Univ Med Sci, 2000, 21 (4):293-295.
[18] Stappert CF, Stathopoulou N, Gerds T, et al. Survival rate and fracture strength of maxillary incisors, re-stored with different kinds of full veneers[J]. J Oral Rehabil, 2005, 32(4):266-272.
[19] 巢永烈, 陈贵丰. 薄型瓷贴面牙体预备术式的分型探讨[J]. 华西口腔医学杂志, 1996, 14(1):38-40. Chao YL, Chen GF. Classification of body prepara-tion type thin porcelain veneer tooth[J]. West Chin J Stomatol, 1996, 14(1):38-40.
[20] Garber DA. Porcelain laminate veneers—to prepare or not to prepare[J]. Compendium, 1991, 12(3):178- 180, 182.
[21] Rouse JS. Full veneer versus traditional veneer pre-paration: a discussion of interproximal extension[J]. J Prosthet Dent, 1997, 78(6):545-549.
[22] Stappert CF, Ozden U, Gerds T, et al. Longevity and failure load of ceramic veneers with different pre-paration designs after exposure to masticatory simu-lation[J]. J Prosthet Dent, 2005, 94(2):132-139.
[23] Zarone F, Epifania E, Leone G, et al. Dynamometric assessment of the mechanical resistance of porcelain veneers related to tooth preparation: a comparison between two techniques[J]. J Prosthet Dent, 2006, 95 (5):354-363.
[24] Magne P, Douglas WH. Design optimization and evolution of bonded ceramics for the anterior denti-tion: a finite-element analysis[J]. Quintessence Int, 1999, 30(10):661-672.
[25] Li Z, Yang Z, Zuo L, et al. A three-dimensional finite element study on anterior laminate veneers with different incisal preparations[J]. J Prosthet Dent, 2014, 112(2):325-333.
[26] Alghazzawi TF, Lemons J, Liu PR, et al. The failure load of CAD/CAM generated zirconia and glass-ceramic laminate veneers with different preparation designs[J]. J Prosthet Dent, 2012, 108(6):386-393.
[27] Atsu SS, Aka PS, Kucukesmen HC, et al. Age-related changes in tooth enamel as measured by electron microscopy: implications for porcelain laminate veneers[J]. J Prosthet Dent, 2005, 94(4):336-341.
[28] Duarte S Jr, de Freitas CR, Saad JR, et al. The effect of immediate dentin sealing on the marginal adap-tation and bond strengths of total-etch and self-etch adhesives[J]. J Prosthet Dent, 2009, 102(1):1-9.
[29] Magne P, Kim TH, Cascione D, et al. Immediate dentin sealing improves bond strength of indirect restorations[J]. J Prosthet Dent, 2005, 94(6):511-519.
[30] The glossary of prosthodontic terms[J]. J Prosthet Dent, 2005, 94(1):10-92.
[31] Simon H, Magne P. Clinically based diagnostic wax-up for optimal esthetics: the diagnostic mock-up[J]. J Calif Dent Assoc, 2008, 36(5):355-362.
[32] Filho AM, Vieira LC, Araújo E, et al. Effect of dif-ferent ceramic surface treatments on resin micro-tensile bond strength[J]. J Prosthodont, 2004, 13(1): 28-35.
[33] Öztürk E, Bolay Ş, Hickel R, et al. Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems[J]. J Dent, 2013, 41(2):97-105.
[34] Lin TM, Liu PR, Ramp LC, et al. Fracture resistance and marginal discrepancy of porcelain laminate ve-neers influenced by preparation design and restora-tive material in vitro [J]. J Dent, 2012, 40(3):202-209.
[35] Stangel I, Ellis TH, Sacher E. Adhesion to tooth structure mediated by contemporary bonding systems [J]. Dent Clin North Am, 2007, 51(3):677-694.
[36] De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results[J]. J Dent Res, 2005, 84 (2):118-132.
[37] Gresnigt MM, Kalk W, Özcan M. Clinical longevity of ceramic laminate veneers bonded to teeth with and without existing composite restorations up to 40 months[J]. Clin Oral Investig, 2013, 17(3):823-832.
[38] Cho SH, Chang WG, Lim BS, et al. Effect of die spacer thickness on shear bond strength of porcelain laminate veneers[J]. J Prosthet Dent, 2006, 95(3): 201-208.
[39] Xu B, Chen X, Li R, et al. Agreement of try-in pas-tes and the corresponding luting composites on the final color of ceramic veneers[J]. J Prosthodont, 2014, 23(4):308-312.
[40] ALGhazali N, Laukner J, Burnside G, et al. An in-vestigation into the effect of try-in pastes, uncured and cured resin cements on the overall color of ce-ramic veneer restorations: an in vitro study[J]. J Dent, 2010, 38 (Suppl 2):e78-e86.
[41] Aida M, Hayakawa T, Mizukawa K. Adhesion of composite to porcelain with various surface condi-tions[J]. J Prosthet Dent, 1995, 73(5):464-470.
[42] Madani M, Chu FC, McDonald AV, et al. Effects of surface treatments on shear bond strengths between a resin cement and an alumina core[J]. J Prosthet Dent, 2000, 83(6):644-647.
[43] Ozcan M, Alkumru HN, Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic [J]. Int J Prosthodont, 2001, 14(4):335-339.
[44] Blatz MB, Chiche G, Holst S, et al. Influence of sur-face treatment and simulated aging on bond strengths of luting agents to zirconia[J]. Quintessence Int, 2007, 38(9):745-753.
[45] Kern M, Wegner SM. Bonding to zirconia ceramic: adhesion methods and their durability[J]. Dent Mater, 1998, 14(1):64-71.

Metrics

Viewed

Full text

Abstract

Cited

Shared

Discussed