国际口腔医学杂志

国际口腔医学杂志 ›› 2018, Vol. 45 ›› Issue (3): 301-306.doi: 10.7518/gjkq.2018.03.011

• 影像学专栏 • 上一篇    下一篇

三维立体摄影技术自然头位校正方法的研究进展

尹一佳, 冯捷, 罗梦奇, 韩向龙   

  1. 口腔疾病研究国家重点实验室 国家口腔疾病临床医学研究中心 四川大学华西口腔医院正畸科 成都 610041
  • 收稿日期:2017-08-13 修回日期:2017-12-08 发布日期:2018-05-08
  • 通讯作者: 韩向龙,副教授,博士,Email：xhan@vip.163.com
  • 作者简介:尹一佳,学士,Email：Yvonnist@163.com
  • 基金资助:
    国家自然科学基金（81671024）

Research progress on the correction of natural head position with three-dimensional stereo-photography

Yin Yijia, Feng Jie, Luo Mengqi, Han Xianglong   

  1. State Key Laboratory of Oral Diseases & National Clinical Research Center for Oral Diseases & Dept. of Orthodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
  • Received:2017-08-13 Revised:2017-12-08 Published:2018-05-08
  • Supported by:
    This study was supported by National Natural Science Foundation of China (81671024).

RichHTML

9

PDF (PC)

284

摘要： 随着患者美学要求的提高,软组织评估对颌面部治疗尤其是建立量化畸形数据库、制定治疗方案和开展术前评估愈发重要。临床工作中,三维摄影技术如锥形束计算机断层扫描、三维立体摄影、激光扫描等,相比二维摄影技术如头部正、侧面照片和头影X线测量,具有精准、快捷、自动、无害的优点。然而,尚无国际统一的三维颌面部测量标准限制了三维摄影技术的临床应用。由于自然头位是目前公认的评价面部容貌的最佳参照基准,故建立三维颌面部测量标准的首要任务是建立摆正头位的标准方法。本文着重叙述基于三维立体摄影技术的头位摆正方法,并将系列方法与基于锥形束计算机断层扫描的头位摆正方法进行比较分析,进而讨论理想的以三维立体摄影技术为基础的头位摆正方法。

关键词: 自然头位, 三维立体摄影技术, 锥形束计算机断层扫描

Abstract: With the growing importance of esthetic considerations, soft-tissue evaluation plays a crucial role in maxillofacial treatment, including the establishment of normative anthropometric database, treatment planning, and postoperative evaluation. In therapy, three-dimensional (3D) photography techniques with high reproducibility, such as cone beam computed tomography (CBCT), 3D stereo-photography, and laser scanning technology, can facilitate the comprehensive oral and maxillofacial assessment different from direct and 2D measurements. 3D photography is faster, more precise, more automatic and less harmful than the traditional methods. A universal standard for 3D-maxillofacial morphology has not been established, thus limiting the clinical applications of 3D stereo-photography. Natural head position is the most direct reference to maxillofacial assessment. However, the lack of a standardized method of correcting natural head position is the main factor that limits the use of 3D stereo-photography. Therefore, a versatile method for correcting accurate and reliable head position is needed. In this paper, several methods for recording and correcting the natural head position based on 3D stereo-photography were discussed. The difference between the correction procedure based on 3D stereo-photography and CBCT were compared, and the optimal approach for correcting natural head position in 3D scale was determined.

Key words: natural head position, three-dimensional stereo-photography, cone beam computed tomography

中图分类号: 

  • R783.5
[1] Lee S.Three-dimensional photography and its app-lication to facial plastic surgery[J]. Arch Facial Plast Surg, 2004, 6(6):410-414.
[2] Nanda V, Gutman B, Bar E, et al.Quantitative an-alysis of 3-dimensional facial soft tissue photographic images: technical methods and clinical application[J].Prog Orthod, 2015, 16:21.
[3] Kau CH, Richmond S, Incrapera A, et al.Three-di-mensional surface acquisition systems for the study of facial morphology and their application to maxil-lofacial surgery[J]. Int J Med Robot, 2007, 3(2):97-110.
[4] Baik HS, Kim SY.Facial soft-tissue changes in ske-letal Class Ⅲ orthognathic surgery patients analyzed with 3-dimensional laser scanning[J]. Am J Orthod Dentofacial Orthop, 2010, 138(2):167-178.
[5] Naini FB, Akram S, Kepinska J, et al.Validation of a new three-dimensional imaging system using com-parative craniofacial anthropometry[J]. Maxillofac Plast Reconstr Surg, 2017, 39(1):23.
[6] Patel A, Islam SM, Murray K, et al.Facial asymme-try assessment in adults using three-dimensional surface imaging[J]. Prog Orthod, 2015, 16:36.
[7] Plooij JM, Swennen GR, Rangel FA, et al.Evalua-tion of reproducibility and reliability of 3D soft tissue analysis using 3D stereophotogrammetry[J]. Int J Oral Maxillofac Surg, 2009, 38(3):267-273.
[8] de Menezes M, Rosati R, Ferrario VF, et al. Ac-curacy and reproducibility of a 3-dimensional stereo-photogrammetric imaging system[J]. J Oral Maxillo-fac Surg, 2010, 68(9):2129-2135.
[9] Jayaratne YS, Zwahlen RA.Application of digital anthropometry for craniofacial assessment[J]. Cra-niomaxillofac Trauma Reconstr, 2014, 7(2):101-107.
[10] Moorrees CF.Natural head position—a revival[J]. Am J Orthod Dentofacial Orthop, 1994, 105(5):512-513.
[11] Cooke MS, Wei SH.The reproducibility of natural head posture: a methodological study[J]. Am J Or-thod Dentofacial Orthop, 1988, 93(4):280-288.
[12] Peng L, Cooke MS.Fifteen-year reproducibility of natural head posture: a longitudinal study[J]. Am J Orthod Dentofacial Orthop, 1999, 116(1):82-85.
[13] Masoud MI, Bansal N, C Castillo J, et al. 3D dento-facial photogrammetry reference values: a novel approach to orthodontic diagnosis[J]. Eur J Orthod, 2017, 39(2):215-225.
[14] Ferrario VF, Sforza C, Miani A, et al.Craniofacial morphometry by photographic evaluations[J]. Am J Orthod Dentofacial Orthop, 1993, 103(4):327-337.
[15] de Paula LK, Ackerman JL, Carvalho Fde A, et al. Digital live-tracking 3-dimensional minisensors for recording head orientation during image acquisition[J]. Am J Orthod Dentofacial Orthop, 2012, 141(1): 116-123.
[16] Xia JJ, McGrory JK, Gateno J, et al. A new method to orient 3-dimensional computed tomography models to the natural head position: a clinical feasibility study[J]. J Oral Maxillofac Surg, 2011, 69(3):584-591.
[17] Damstra J, Fourie Z, Ren Y.Simple technique to achieve a natural position of the head for cone beam computed tomography[J]. Br J Oral Maxillofac Surg, 2010, 48(3):236-238.
[18] 刘筱菁, 李倩倩, 田凯月, 等. 陀螺仪记录转移自然头位系统的建立及其精度检测[J]. 北京大学学报(医学版), 2014, 46(1):86-89.
Liu XJ, Li QQ, Tian KY, et al.Establishment and accuracy examination of gyroscope for recording and transferring natural head position[J]. J Peking Univ (Health Sci), 2014, 46(1):86-89.
[19] Kim DS, Yang HJ, Huh KH, et al.Three-dimen-sional natural head position reproduction using a single facial photograph based on the POSIT method[J]. J Craniomaxillofac Surg, 2014, 42(7):1315-1321.
[20] Weber DW, Fallis DW, Packer MD.Three-dimen-sional reproducibility of natural head position[J]. Am J Orthod Dentofacial Orthop, 2013, 143(5):738-744.
[21] Tian K, Li Q, Wang X, et al.Reproducibility of natural head position in normal Chinese people[J]. Am J Orthod Dentofacial Orthop, 2015, 148(3):503-510.
[22] Liu XJ, Li QQ, Pang YJ, et al.Modified method of recording and reproducing natural head position with a multicamera system and a laser level[J]. Am J Orthod Dentofacial Orthop, 2015, 147(6):781-787.
[23] Cassi D, De Biase C, Tonni I, et al.Natural position of the head: review of two-dimensional and three-dimensional methods of recording[J]. Br J Oral Maxillofac Surg, 2016, 54(3):233-240.
[24] Hsung TC, Lo J, Li TS, et al.Recording of natural head position using stereophotogrammetry: a new technique and reliability study[J]. J Oral Maxillofac Surg, 2014, 72(11):2256-2261.
[25] Hsung TC, Lo J, Li TS, et al.Automatic detection and reproduction of natural head position in stereo-photogrammetry[J]. PLoS One, 2015, 10(6):e0130877.
[26] Schatz EC, Xia JJ, Gateno J, et al.Development of a technique for recording and transferring natural head position in 3 dimensions[J]. J Craniofac Surg, 2010, 21(5):1452-1455.
[27] Cevidanes L, Oliveira AE, Motta A, et al.Head orientation in CBCT-generated cephalograms[J]. Angle Orthod, 2009, 79(5):971-977.
[28] Ackerman JL, Proffit WR, Sarver DM, et al.Pitch, roll, and yaw: describing the spatial orientation of dentofacial traits[J]. Am J Orthod Dentofacial Orthop, 2007, 131(3):305-310.
[29] Park IK, Lee KY, Jeong YK, et al.Recording natural head position using an accelerometer and reconstruc-tion from computed tomographic images[J]. J Korean Assoc Oral Maxillofac Surg, 2017, 43(4):256-261.
[30] Zhu S, Keeling A, Hsung TC, et al.The difference between registered natural head position and estima-ted natural head position in three dimensions[J]. Int J Oral Maxillofac Surg, 2017. doi:10.1016/j.ijom.2017.07.016.
[1] 刘盼明,李政泽,李军鹤,崔淑霞. 成人骨性Ⅱ类患者不同垂直骨面型上颌窦容积及口咽气道体积的锥形束计算机断层扫描研究[J]. 国际口腔医学杂志, 2023, 50(5): 528-537.
[2] 刘力嘉,毛婧,龙欢,蒲亚龙,王军. 二维与三维头影测量自动定点的研究进展[J]. 国际口腔医学杂志, 2022, 49(1): 100-108.
[3] 周梦琪,陈学鹏,傅柏平. 正畸治疗中牙槽骨骨开窗骨开裂的预防和应对策略[J]. 国际口腔医学杂志, 2021, 48(5): 600-608.
[4] 伍春兰,唐华,陈军. 成人骨性Ⅱ类高角开牙合患者上下切牙区牙槽骨形态的三维研究[J]. 国际口腔医学杂志, 2021, 48(4): 426-432.
[5] 王立冬,马文,付帅,张长彬,崔庆赢,梁燕,黎明. 不同方法制作正颌手术数字化牙合板的研究及精确性分析[J]. 国际口腔医学杂志, 2021, 48(2): 156-164.
[6] 张紫涵,熊鑫,王军. 三维头影测量的研究现状和应用发展[J]. 国际口腔医学杂志, 2020, 47(6): 739-744.
[7] 刘晓华, 王恩博. 儿童埋伏多生牙拔除术锥形束计算机断层扫描影像学定位的应用进展[J]. 国际口腔医学杂志, 2018, 45(3): 295-300.
[8] 谢柳萍,张卫兵. 三维立体摄影技术在颜面部软组织中的应用[J]. 国际口腔医学杂志, 2016, 43(2): 201-206.
[9] 易炜,周力,赵美英,. 颅面结构形态、功能与头颈姿势的关系[J]. 国际口腔医学杂志, 2008, 35(S1): -.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] 王昆润. 二甲亚砜和双氯芬酸并用治疗根尖周炎[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 汤庆奋,王学侠. 17β-雌二醇对人类阴道和口腔颊粘膜的渗透性[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 潘劲松. 颈总动脉指压和颈内动脉球囊阻断试验在大脑血液动力学中的不同影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 王昆润. 后牙冠根斜形牙折的治疗[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 杨锦波. 嵌合体防龋疫苗的研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 王昆润. 下颔骨成形术用网状钛板固定植骨块[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 汪月月,郭莉莉. 口腔机能与老化—痴呆危险因素流行病学研究[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 丁刚. 应用硬组织代用品种植体行丰颏术[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 田磊. 局部应用脂多糖后结合上皮反应性增生的变化[J]. 国际口腔医学杂志, 1999, 26(04): .
[10] 戴青. 口腔念珠菌病的新分类[J]. 国际口腔医学杂志, 1999, 26(04): .