国际口腔医学杂志 ›› 2018, Vol. 45 ›› Issue (1): 97-99.doi: 10.7518/gjkq.2018.01.019

• 综述 • 上一篇    下一篇

超声器械在肩台预备中的应用现状和研究进展

田斌, 李雨轩, 余娜   

  1. 宁夏医科大学附属银川市口腔医院修复科 银川 750001
  • 收稿日期:2017-05-22 修回日期:2017-09-29 发布日期:2018-01-15
  • 通讯作者: 田斌,副主任医师,学士,Email:1206502414@qq.com
  • 作者简介:田斌,副主任医师,学士,Email:1206502414@qq.com

Research progress on ultrasonic instruments applied in refined margin shoulder preparation

Tian Bin, Li Yuxuan, Yu Na   

  1. Dept. of Prothodontics, Yinchuan Stomatological Hospital of Ningxia Medical University, Yinchuan 750001, China
  • Received:2017-05-22 Revised:2017-09-29 Published:2018-01-15

摘要: 随着固定修复肩台预备要求的不断提高,近年来,超声器械被用于牙体预备肩台的精修中,其良好的肩台光滑效果顺应了口腔固定修复精细化发展的趋势,而超声器械在肩台应用领域的研究目前仍以体外实验为主,本文就国内外超声器械在肩台预备应用中的研究进展进行回顾、分析和展望。

关键词: 超声器械, 牙体预备, 肩台

Abstract: In recent years, ultrasonic instruments have been applied for margin shoulder refining with higher standard raised in fixed prosthesis. It’s excellent effects in smoothing margin shoulder complied with the precision trend. While the in vitro research occupied an predominant position in relevant aspects. This article was written to conduct a retrospective analysis and develop future tendency on application of ultrasonic instruments in margin shoulder perfection.

Key words: ultrasonic instrument, tooth preparation, margin shoulder

中图分类号: 

  • R783.3
[1]Horne P, Bennani V, Chandler N, et al. Ultrasonic margin preparation for fixed prosthodontics: a pilot study[J]. J Esthet Restor Dent, 2012, 24(3):201-209.
[2]Faus-Matoses I, Solá-Ruiz F. Dental preparation with sonic vs high-speed finishing: analysis of microleakage in bonded veneer restorations[J]. J Adhes Dent, 2014, 16(1):29-34.
[3]Oman CR, Applebaum E. Ultrasonic cavity prepara-tion. Ⅱ. Progress report[J]. J Am Dent Assoc, 1955, 50(4):414-417.
[4]Carvalho CA, Fagundes TC, Barata TJ, et al. The use of CVD diamond burs for ultraconservative cavity preparations: a report of two cases[J]. J Esthet Restor Dent, 2007, 19(1):19-29.
[5]Wanserski DJ, Sobczak KP, Monaco JG, et al. An analysis of margin adaptation of all-porcelain facial margin ceramometal crowns[J]. J Prosthet Dent, 1986, 56(3):289-292.
[6]Zena RB, Khan Z, von Fraunhofer JA. Shoulder preparations for collarless metal ceramic crowns: hand-planning as opposed to rotary instrumenta-tion[J]. J Prosthet Dent, 1989, 62(3):273-277.
[7]Laufer BZ, Pilo R, Cardash HS. Surface roughness of tooth shoulder preparations created by rotary in-strumentation, hand planing, and ultrasonic oscilla-tion[J]. J Prosthet Dent, 1996, 75(1):4-8.
[8]Tan K, Pjetursson BE, Lang NP, et al. A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years[J]. Clin Oral Implants Res, 2004, 15(6):654-666.
[9]侯永福, 边华琴, 张磊, 等. 超声预备牙体表面的三维形貌分析[J]. 上海口腔医学, 2016, 25(3):288- 291. Hou YF, Bian HQ, Zhang L, et al. 3-D surface topo-graphy of ultrasonic preparation tooth: a pilot study[J]. Shanghai J Stomatol, 2016, 25(3):288-291.
[10]连峰, 谭家政, 张会臣. 表面形貌对润湿性及抗附着性能的影响[J]. 功能材料, 2014, 45(2):2105- 2109. Lian F, Tan JZ, Zhang HC. The impacts of the sur-face pattern on its wettability and antifouling perfor-mance[J]. J Functional Mater, 2014, 45(2):2105- 2109.
[11]Ellis R, Bennani V, Purton D, et al. The effect of ultrasonic instruments on the quality of preparation margins and bonding to dentin[J]. J Esthet Restor Dent, 2011, 24(4):278-285.
[12]Matsuo M, Saito M, Tamaki K, et al. A scanning electron microscope observation of gingival micro-vasculature after ultrasonic tooth preparation[J]. Microvascul Reviews Communicat, 2009, 3(1):25- 31.
[13]Takahashi K. Vascular architecture of dog pulp using corrosion resin cast examined under a scanning electron microscope[J]. J Dent Res, 1985, 64:579- 584.
[14]von Fraunhofer JA, Siegel SC, Feldman S. Hand-piece coolant flow rates and dental cutting[J]. Oper Dent, 2000, 25(6):544-548.
[15]Vanderlei AD, Borges AL, Cavalcanti BN, et al. Ultrasonic versus high-speed cavity preparation: analysis of increases in pulpal temperature and time to complete preparation[J]. J Prosthet Dent, 2008, 100(2):107-109.
[16]Thomas MS, Kundabala M. Pulp hyperthermia du-ring tooth preparation: the effect of rotary—instru-ments, lasers, ultrasonic devices, and airborne par-ticle abrasion[J]. J Calif Dent Assoc, 2012, 40(9): 720-731.
[1] 王晓晨,王剑. 后牙全锆冠龈边缘预备形式的研究进展[J]. 国际口腔医学杂志, 2023, 50(4): 485-490.
[2] 王剑. 浅谈嵌体和高嵌体修复的临床应用[J]. 国际口腔医学杂志, 2021, 48(5): 497-505.
[3] 沈冬妮,施莹,傅柏平. 后牙牙合贴面修复的研究进展[J]. 国际口腔医学杂志, 2021, 48(3): 287-291.
[4] 孟玉坤, 宗弋. 瓷贴面修复的研究现状及临床应用[J]. 国际口腔医学杂志, 2017, 44(1): 1-10.
[5] 王茹燕1,2 宋颖3 黄定明1 高原1. 使用硅酸盐水泥模拟矿物三氧化物聚合物评估不同根尖屏障制备技术的体外研究[J]. 国际口腔医学杂志, 2016, 43(1): 8-.
[6] 唐颖 袁剑鸣 潘峰. 肩台瓷金瓷冠在前牙修复中的临床效果观察[J]. 国际口腔医学杂志, 2013, 40(4): 456-458.
[7] 李中杰 浩志超综述 孟玉坤审校. 瓷贴面修复牙体不同预备类型比较的研究进展[J]. 国际口腔医学杂志, 2012, 39(4): 543-546.
[8] 刘晶莹综述 刘晓明审校. 不同牙体预备对瓷贴面力学性能和临床修复效果的影响[J]. 国际口腔医学杂志, 2012, 39(3): 404-407.
[9] 卫文娟综述 孙迎春,高平审校 . 瓷贴面修复临床应用的研究进展[J]. 国际口腔医学杂志, 2010, 37(5): 604-607.
[10] 张平娟综述 陈文霞审校. 超声牙根尖倒预备技术与微裂[J]. 国际口腔医学杂志, 2008, 35(2): 170-172.
[11] 程辉,郑志强,程祥荣. 缓解牙体预备后活髓基牙牙本质敏感的方法研究进展[J]. 国际口腔医学杂志, 2005, 32(03): 227-229.
[12] 葛艳,张保卫. 全冠修复固位力的影响因素[J]. 国际口腔医学杂志, 2004, 31(01): 69-71.
[13] 赵玮 赵云凤. 全冠的牙体预备[J]. 国际口腔医学杂志, 2003, 30(02): 151-153.
[14] 冯云枝. 固定修复对活髓牙牙髓健康的影响[J]. 国际口腔医学杂志, 2002, 29(06): -.
[15] 高海. 显微镜在口腔修复中的应用[J]. 国际口腔医学杂志, 2002, 29(01): -.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张新春. 桩冠修复与无髓牙的保护[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 王昆润. 长期单侧鼻呼吸对头颅发育有不利影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[3] 彭国光. 颈淋巴清扫术中颈交感神经干的解剖变异[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 杨凯. 淋巴化疗的药物运载系统及其应用现状[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 康非吾. 种植义齿下部结构生物力学研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 柴枫. 可摘局部义齿用Co-Cr合金的激光焊接[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 孟姝,吴亚菲,杨禾. 伴放线放线杆菌产生的细胞致死膨胀毒素及其与牙周病的关系[J]. 国际口腔医学杂志, 2005, 32(06): 458 -460 .
[8] 费晓露,丁一,徐屹. 牙周可疑致病菌对口腔黏膜上皮的粘附和侵入[J]. 国际口腔医学杂志, 2005, 32(06): 452 -454 .
[9] 赵兴福,黄晓晶. 变形链球菌蛋白组学研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .
[10] 庞莉苹,姚江武. 抛光和上釉对陶瓷表面粗糙度、挠曲强度及磨损性能的影响[J]. 国际口腔医学杂志, 2008, 35(S1): .