国际口腔医学杂志 ›› 2019, Vol. 46 ›› Issue (5): 571-577.doi: 10.7518/gjkq.2019072

• 综述 • 上一篇    下一篇

种植固定修复中基台机械并发症的研究进展

付栩楠,谢志刚()   

  1. 昆明医科大学附属口腔医院口腔种植科 昆明 650106
  • 收稿日期:2018-12-17 修回日期:2019-05-06 出版日期:2019-09-01 发布日期:2019-09-10
  • 通讯作者: 谢志刚
  • 作者简介:付栩楠,硕士,Email: fuxunan@126.com

Research progress on abutment technical complications in fixed implant-supported prostheses

Fu Xunan,Xie Zhigang()   

  1. Dept. of Implantology, The Affiliated Stomatological Hospital of Kunming Medical University, Kunming 650106, China
  • Received:2018-12-17 Revised:2019-05-06 Online:2019-09-01 Published:2019-09-10
  • Contact: Zhigang Xie

摘要:

近年来种植体存留率明显提高,但种植修复中的并发症仍不容忽视,尤其是种植义齿各个组成部分的机械并发症。基台作为种植修复中的重要组成部分,起到连接种植体,支持、固定种植体上部结构的关键作用,但基台-种植体,基台-上部修复结构的连接界面是种植系统中容易产生应力集中的薄弱环节,也是机械并发症的好发部位,常见的基台机械并发症有基台松动或折断和螺丝松动或折断,基台的失败不仅影响上部修复的效果,严重者可导致种植修复的失败。本文就种植固定修复基台机械并发症的原因、预防、治疗进行阐述。

关键词: 种植固定修复, 基台, 基台螺丝, 机械并发症

Abstract:

The implant survival rate has significantly increased. However, the complications of implant prostheses cannot be ignored, especially technical complications. As an important part of implant-supported prostheses, abutments are used to connect the implants and support the superstructures. However, the interfaces between abutment and implant, abutment and superstructures are easy to produce stress concentration that are also the predilection sites for technical complications. Common technical complications of abutments include loose or fractured abutments and screws. The technical complications of abutments affect the success of fixed implant-supported prostheses. This paper aims to discuss the predisposing factors, prevention, and treatment options of the technical complications of abutments in fixed implant-supported prostheses.

Key words: fixed implant-supported prostheses, abutment, abutment screw, technical complication

中图分类号: 

  • R783.1

Tab 1

Technical complications for abutments"

并发症 SC FPP FAFDP
螺丝固位(95%CI) 粘接固位(95%CI) 螺丝固位(95%CI) 粘接固位(95%CI) 螺丝固位(95%CI)
颌向螺丝松动 0.90%(0.20,4.09) - 1.83%(0.47,7.02) - 1.75%(0.63,4.87)
基台松动 2.07%(0.65,6.58) 0.33%(0.15,0.71) 1.02%(0.40,2.57) 0.29%(0.02,3.44) 0.74%(0.10,5.33)
基台折断 0.08%(0.01,0.59) 0%(-) 0.07%(0.01,0.47) 0%(-) 0.16%(0.05,0.52)
螺丝折断 0.31%(0.07,1.32) 0%(-) 0.21%(0.08,0.53) 0%(-) 0.52%(0.15,1.88)
[1] Thalji G, Bryington M, De Kok IJ , et al. Prosthodontic management of implant therapy[J]. Dent Clin North Am, 2014,58(1):207-225.
[2] Pjetursson BE, Thoma D, Jung R , et al. A systematic review of the survival and complication rates of implant-supported fixed dental prostheses (FDPs) after a mean observation period of at least 5 years[J]. Clin Oral Implants Res, 2012,23(Suppl 6):22-38.
[3] Sadid-Zadeh R, Kutkut A, Kim H . Prosthetic failure in implant dentistry[J]. Dent Clin North Am, 2015,59(1):195-214.
[4] Hajimiragha H, Abolbashari M, Nokar S , et al. Bone response from a dynamic stimulus on a one-piece and multi-piece implant abutment and crown by finite element analysis[J]. J Oral Implantol, 2014,40(5):525-532.
[5] Al Jabbari Y, Fournelle R, Ziebert G , et al. Mechanical behavior and failure analysis of prosthetic retaining screws after long-term use in vivo. Part 2: metallurgical and microhardness analysis[J]. J Prosthodont, 2008,17(3):181-191.
[6] McGlumphy EA, Mendel DA, Holloway JA . Implant screw mechanics[J]. Dent Clin North Am, 1998,42(1):71-89.
[7] Stüker RA, Teixeira ER, Beck JC , et al. Preload and torque removal evaluation of three different abutment screws for single standing implant restorations[J]. J Appl Oral Sci, 2008,16(1):55-58.
[8] Yao KT, Kao HC, Cheng CK , et al. The effect of clockwise and counterclockwise twisting moments on abutment screw loosening[J]. Clin Oral Implants Res, 2012,23(10):1181-1186.
[9] da Silva LH, Ribeiro S, Borges AL , et al. FEA and microstructure characterization of a one-piece Y-TZP abutment[J]. Dent Mater, 2014,30(11):e283-e288.
[10] Cho SC, Small PN, Elian N , et al. Screw loosening for standard and wide diameter implants in partially edentulous cases: 3- to 7-year longitudinal data[J]. Implant Dent, 2004,13(3):245-250.
[11] Krishnan V, Tony Thomas C, Sabu I . Management of abutment screw loosening: review of literature and report of a case[J]. J Indian Prosthodont Soc, 2014,14(3):208-214.
[12] Shin HM, Huh JB, Yun MJ , et al. Influence of the implant-abutment connection design and diameter on the screw joint stability[J]. J Adv Prosthodont, 2014,6(2):126-132.
[13] Pardal-Peláez B, Montero J . Preload loss of abutment screws after dynamic fatigue in single implant-supported restorations. A systematic review[J]. J Clin Exp Dent, 2017,9(11):e1355-e1361.
[14] Bernardes SR, da Gloria Chiarello de Mattos M, Hobkirk J , et al. Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences[J]. Int J Oral Maxillofac Implants, 2014,29(1):89-96.
[15] Siamos G, Winkler S, Boberick KG . Relationship between implant preload and screw loosening on implant-supported prostheses[J]. J Oral Implantol, 2002,28(2):67-73.
[16] Schulte JK, Coffey J . Comparison of screw retention of nine abutment systems: a pilot study[J]. Implant Dent, 1997,6(1):28-31.
[17] Sivaraman K, Chopra A, Narayan AI , et al. Is zirconia a viable alternative to titanium for oral implant? A critical review[J]. J Prosthodont Res, 2018,62(2):121-133.
[18] Cionca N, Hashim D, Mombelli A . Zirconia dental implants: where are we now, and where are we heading[J]. Periodontol 2000, 2017,73(1):241-258.
[19] Coray R, Zeltner M, Özcan M . Fracture strength of implant abutments after fatigue testing: a systematic review and a meta-analysis[J]. J Mech Behav Biomed Mater, 2016,62:333-346.
[20] Zembic A, Kim S, Zwahlen M , et al. Systematic review of the survival rate and incidence of biologic, technical, and esthetic complications of single implant abutments supporting fixed prostheses[J]. Int J Oral Maxillofac Implants, 2014,29(Suppl):99-116.
[21] Klotz MW, Taylor TD, Goldberg AJ . Wear at the titanium-zirconia implant-abutment interface: a pilot study[J]. Int J Oral Maxillofac Implants, 2011,26(5):970-975.
[22] 蒋剑晖, 樊牮, 邹耿森 , 等. 平台转换锥形锁柱种植基台的三维有限元疲劳分析[J]. 口腔医学研究, 2017,33(8):841-844.
Jiang JH, Fan J, Zou GS , et al. Fatigue analysis of taper lock abutment in platform switching implant by three-dimensional finite element[J]. J Oral Sci Res, 2017,33(8):841-844.
[23] Najeeb S, Zafar MS, Khurshid Z , et al. Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics[J]. J Prosthodont Res, 2016,60(1):12-19.
[24] Lee WT, Koak JY, Lim YJ , et al. Stress shielding and fatigue limits of poly-ether-ether-ketone dental implants[J]. J Biomed Mater Res Part B Appl Biomater, 2012,100(4):1044-1052.
[25] Kaleli N, Sarac D, Külünk S , et al. Effect of different restorative crown and customized abutment materials on stress distribution in single implants and peripheral bone: a three-dimensional finite element analysis study[J]. J Prosthet Dent, 2018,119(3):437-445.
[26] 戴文雍, 汤春波 . 种植体修复个性化基台研究现状及展望[J]. 口腔医学, 2012,32(11):685-687.
Dai WY, Tang CB . Current situation and prospects of research on customized abutment of implant prosjournal[J]. Stomatology, 2012,32(11):685-687.
[27] Apaza-Bedoya K, Tarce M, Benfatti CAM , et al. Synergistic interactions between corrosion and wear at titanium-based dental implant connections: a scoping review[J]. J Periodont Res, 2017,52(6):946-954.
[28] Pereira LMS, Sordi MB, Magini RS , et al. Abutment misfit in implant-supported prostheses manufactured by casting technique: an integrative review[J]. Eur J Dent, 2017,11(4):553-558.
[29] De Mori R , Ribeiro CF, da Silva-Concílio LR, et al. Evaluation of castable and premachined metal base abutment/implant interfaces before and after cyclical load[J]. Implant Dent, 2014,23(2):212-217.
[30] Korsch M, Walther W . Prefabricated versus customized abutments: a retrospective analysis of loosening of cement-retained fixed implant-supported reconstructions[J]. Int J Prosthodont, 2015,28(5):522-526.
[31] Patankar A, Kheur M, Kheur S , et al. Fracture resistance of implant abutments following abutment alterations by milling the margins: an in vitro study[J]. J Oral Implantol, 2016,42(6):464-468.
[32] Paek J, Woo YH, Kim HS , et al. Comparative analysis of screw loosening with prefabricated abutments and customized CAD/CAM abutments[J]. Implant Dent, 2016,25(6):770-774.
[33] Park JM, Lee JB, Heo SJ , et al. A comparative study of gold UCLA-type and CAD/CAM titanium implant abutments[J]. J Adv Prosthodont, 2014,6(1):46-52.
[34] Karl M, Taylor TD . Parameters determining micromotion at the implant-abutment interface[J]. Int J Oral Maxillofac Implants, 2014,29(6):1338-1347.
[35] Gehrke SA, Delgado-Ruiz RA, Prados Frutos JC , et al. Misfit of three different implant-abutment connections before and after cyclic load application: an in vitro study[J]. Int J Oral Maxillofac Implants, 2017,32(4):822-829.
[36] Cooper LF, Tarnow D, Froum S , et al. Comparison of marginal bone changes with internal conus and external hexagon design implant systems: a prospective, randomized study[J]. Int J Periodontics Restorative Dent, 2016,36(5):631-642.
[37] Saidin S, Abdul Kadir MR, Sulaiman E , et al. Effects of different implant-abutment connections on micromotion and stress distribution: prediction of microgap formation[J]. J Dent, 2012,40(6):467-474.
[38] Gehrke SA , De Carvalho Serra R. Load fatigue performance of conical implant-abutment connection: effect of torque level and interface junction[J]. Min- erva Stomatol, 2015,64(1):1-7.
[39] Goiato MC , Pellizzer EP, da Silva EV, et al. Is the internal connection more efficient than external connection in mechanical, biological, and esthetical point of views? A systematic review[J]. Oral Maxillofac Surg, 2015,19(3):229-242.
[40] Liu Y, Wang JW . Influences of microgap and micromotion of implant-abutment interface on marginal bone loss around implant neck[J]. Arch Oral Biol, 2017,83:153-160.
[41] Watanabe F, Hiroyasu K, Ueda K . The fracture strength by a torsion test at the implant-abutment interface[J]. Int J Implant Dent, 2015,1(1):25.
[42] Wang K, Geng JP, Jones D , et al. Comparison of the fracture resistance of dental implants with different abutment taper angles[J]. Mater Sci Eng C Mater Biol Appl, 2016,63:164-171.
[43] Gupta S, Gupta H, Tandan A . Technical complications of implant-causes and management: a comprehensive review[J]. Natl J Maxillofac Surg, 2015,6(1):3-8.
[44] Millen C, Brägger U, Wittneben JG . Influence of prosjournal type and retention mechanism on complications with fixed implant-supported prostheses: a systematic review applying multivariate analyses[J]. Int J Oral Maxillofac Implants, 2015,30(1):110-124.
[45] Pjetursson BE, Asgeirsson AG, Zwahlen M , et al. Improvements in implant dentistry over the last decade: comparison of survival and complication rates in older and newer publications[J]. Int J Oral Maxillofac Implants, 2014,29(Suppl):308-324.
[46] Lee JH, Lee JB, Park JI , et al. Mechanical complication rates and optimal horizontal distance of the most distally positioned implant-supported single crowns in the posterior region: a study with a mean follow-up of 3 years[J]. J Prosthodont, 2015,24(7):517-524.
[47] Katona TR, Goodacre CJ, Brown DT , et al. Force-moment systems on single maxillary anterior im-plants: effects of incisal guidance, fixture orientation, and loss of bone support[J]. Int J Oral Maxillofac Implants, 1993,8(5):512-522.
[48] Weinberg LA, Kruger B . A comparison of implant/prosjournal loading with four clinical variables[J]. Int J Prosthodont, 1995,8(5):421-433.
[49] Thulasidas S, Givan DA, Lemons JE , et al. Influence of implant angulation on the fracture resistance of zirconia abutments[J]. J Prosthodont, 2015,24(2):127-135.
[50] Fabbri G, Zarone F, Dellificorelli G , et al. Clinical evaluation of 860 anterior and posterior lithium disilicate restorations: retrospective study with a mean follow-up of 3 years and a maximum observational period of 6 years[J]. Int J Periodontics Restorative Dent, 2014,34(2):165-177.
[51] Quaranta A, Piemontese M, Rappelli G , et al. Technical and biological complications related to crown to im- plant ratio: a systematic review[J]. Implant Dent, 2014,23(2):180-187.
[52] Meijer HJA, Boven C, Delli K , et al. Is there an effect of crown-to-implant ratio on implant treatment outcomes? A systematic review[J]. Clin Oral Implants Res, 2018,29(Suppl 18):243-252.
[53] Romeo E, Storelli S . Systematic review of the survival rate and the biological, technical, and aesthetic complications of fixed dental prostheses with cantilevers on implants reported in longitudinal studies with a mean of 5 years follow-up[J]. Clin Oral Implants Res, 2012,23(Suppl 6):39-49.
[54] Wittneben JG, Millen C, Brägger U . Clinical performance of screw- versus cement-retained fixed implant-supported reconstructions: a systematic review[J]. Int J Oral Maxillofac Implants, 2014,29(Suppl):84-98.
[55] ElHoussiney AG, Zhang H, Song JL , et al. Influence of implant location on the clinical outcomes of implant abutments: a systematic review and meta-analysis[J]. Clin Cosmet Investig Dent, 2018,10:19-35.
[56] Shemtov-Yona K, Rittel D . An overview of the mechanical integrity of dental implants[J]. Biomed Res Int, 2015,2015:547384.
[57] Zhou Y, Gao JX, Luo L , et al. Does bruxism contribute to dental implant failure? A systematic review and meta-analysis[J]. Clin Implant Dent Relat Res, 2016,18(2):410-420.
[58] Karl M, Taylor TD . Effect of cyclic loading on micromotion at the implant-abutment interface[J]. Int J Oral Maxillofac Implants, 2016,31(6):1292-1297.
[59] Kourtis S, Damanaki M, Kaitatzidou S , et al. Loosening of the fixing screw in single implant crowns: predisposing factors, prevention and treatment options[J]. J Esthet Restor Dent, 2017,29(4):233-246.
[60] Gupta V, Prithviraj DR, Muley N . A new restorative technique for the perishing implant due to abutment screw fracture[J]. J Oral Implantol, 2014,40(6):755-757.
[1] 万乾炳. 氧化锆基台的研究现状和临床应用效果[J]. 国际口腔医学杂志, 2018, 45(1): 1-8.
[2] 李燕玲, 王劲茗. 计算机辅助设计与制作钛支架在无牙颌患者种植固定修复中的应用现状[J]. 国际口腔医学杂志, 2017, 44(3): 344-349.
[3] 苟敏 蔡潇潇. 种植体—基台微间隙对种植体颈部周围骨的影响[J]. 国际口腔医学杂志, 2015, 42(6): 733-738.
[4] 纪林林1综述 柳忠豪2审校. 种植体生物学宽度的研究进展[J]. 国际口腔医学杂志, 2012, 39(4): 547-549.
[5] 王伟嘉1 龙刚2 胡嘉伟3 何瑞华4 孙勇4. 钴铬合金和钛基台与全瓷冠间粘接界面的三维有限元应力分析[J]. 国际口腔医学杂志, 2011, 38(1): 10-13.
[6] 王敏综述 夏海斌审校. 全瓷基台的研究进展[J]. 国际口腔医学杂志, 2009, 36(5): 610-612.
[7] 施斌. 种植系统的机械力学特性[J]. 国际口腔医学杂志, 1999, 26(05): -.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王昆润. 二甲亚砜和双氯芬酸并用治疗根尖周炎[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 汤庆奋,王学侠. 17β-雌二醇对人类阴道和口腔颊粘膜的渗透性[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 潘劲松. 颈总动脉指压和颈内动脉球囊阻断试验在大脑血液动力学中的不同影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 王昆润. 后牙冠根斜形牙折的治疗[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 杨锦波. 嵌合体防龋疫苗的研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 王昆润. 下颔骨成形术用网状钛板固定植骨块[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 汪月月,郭莉莉. 口腔机能与老化—痴呆危险因素流行病学研究[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 丁刚. 应用硬组织代用品种植体行丰颏术[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 田磊. 局部应用脂多糖后结合上皮反应性增生的变化[J]. 国际口腔医学杂志, 1999, 26(04): .
[10] 戴青. 口腔念珠菌病的新分类[J]. 国际口腔医学杂志, 1999, 26(04): .