国际口腔医学杂志

国际口腔医学杂志 ›› 2018, Vol. 45 ›› Issue (6): 686-689.doi: 10.7518/gjkq.2018.06.011

• 论著 • 上一篇    下一篇

扫描对象对计算机辅助设计/计算机辅助制造钴铬烤瓷冠精确性影响的研究

赵莹,杨柳,谢宇,张艳,魏溦,李江()   

  1. 吉林大学口腔医院修复科 长春 130021
  • 收稿日期:2018-01-12 修回日期:2018-05-03 出版日期:2018-11-01 发布日期:2018-11-15
  • 通讯作者: 李江 E-mail:ljiang@jlu.edu.cn
  • 作者简介:赵莹,硕士,Email： 1562151778@qq.com

Comparison of accuracies from different scanned objects of Co-Cr metal porcelain crowns fabricated with com-puter aided design/computer aided manufacture technique

Ying Zhao,Liu Yang,Yu Xie,Yan Zhang,Wei Wei,Jiang Li()   

  1. Dept. of Prosthodontics, Hospital of Stomatology, Jilin University, Changchun 130021, China
  • Received:2018-01-12 Revised:2018-05-03 Online:2018-11-01 Published:2018-11-15
  • Contact: Jiang Li E-mail:ljiang@jlu.edu.cn

RichHTML

7

PDF (PC)

236

摘要：

目的 比较不同的扫描对象对计算机辅助设计（CAD）/计算机辅助制造（CAM）钴铬烤瓷冠精确性的影响。方法 利用CAD/CAM技术制作15个钴铬烤瓷冠试件,根据不同的扫描对象：预备离体牙、硅橡胶印模和石膏模型,均分为实验B组（B1、B2和B3组）,另外使用传统失蜡法铸造5个试件作为对照（A组）,采用微计算机断层扫描技术比较边缘（AMD点和MG点）及内部适合性（CA点、AW点、AOT点、OA点）的差异,对结果进行单因素方差分析和配对t检验。结果 在边缘适合性上,B组AMD点的数值均明显小于A组（P<0.05）,两组在MG点上的差异无统计学意义;在内部适合性上,B组除OA点外的其他位点的测量数值均小于A组,其中AOT、AW、OA点B1、2组与A组的测量差异有统计学意义（P<0.05）,B3组与A组的差异无统计学意义（P>0.05）;B组与A组CA点的差异均无统计学意义（P>0.05）。结论 硅橡胶印模的精确性明显优于预备后的离体牙及石膏模型,CAD/CAM相比传统失蜡铸造技术来说,试件具有更佳的边缘及内部适合性。

关键词: 计算机辅助设计/计算机辅助制造, 硅橡胶, 微计算机断层扫描技术, 边缘及内部适合性

Abstract:

Objective To evaluate the effects of different scanning objects on the accuracy of computer aided design (CAD)/computer aided manufacture (CAM) Co-Cr metal porcelain crowns.Methods Fifteen Co-Cr metal porcelain crown specimens were fabricated by CAD/CAM technology. According to different scanning objects: prepared teeth, silicone rubber and stone die, they were divided into experimental B groups (group B1, B2, B3). Five specimens of traditional lost wax casting were used as control (group A). Marginal fits (AMD point and MG point) and internal fits (CA point, AW point, AOT point and OA point) were measured by the micro-CT. Statistical analysis was performed via one-way ANOVA and paired-t-test.Results The AMD point’ marginal fits of the experimental B groups were smaller than group A (P<0.05), there was no statistic difference in MG point’ marginal fits between the experimental B groups and group A. The experimental B groups had smaller internal fits than group A except OA point. The internal fits of group B1, 2 were smaller than the group A at AOT, AW and OA points (P<0.05), except group B3 (P>0.05). There was no statistic difference in CA point’ internal fits between the experimental B groups and group A (P>0.05).Conclusion The accuracy of silicone rubber is higher than the prepared tooth and stone die. Comparing to the traditional casting, the CAD/CAM has better marginal and internal fits.

Key words: computer aided design/computer aided manufacture, silicone rubber, Micro-CT, marginal and internal fit

中图分类号: 

  • R783.2

图 1

Micro-CT 二维图像上内部（A）及边缘（B）适合性的测量位点"

图 2

上瓷前后边缘及内部适合性的差异 *代表差异有统计学意义（P<0.05）。"

[1] Mously HA, Finkelman M, Zandparsa R , et al. Mar-ginal and internal adaptation of ceramic crown resto-rations fabricated with CAD/CAM technology and the heat-press technique[J]. J Prosthet Dent, 2014,112(2):249-256.
doi: 10.1016/j.prosdent.2014.03.017 pmid: 24795263
[2] Rekow ED . Dental CAD-CAM systems. What is the state of the art[J]. J Am Dent Assoc, 1991,122(12):42-48.
doi: 10.14219/jada.archive.1991.0205 pmid: 1783723
[3] Beuer F, Schweiger J, Edelhoff D . Digital dentistry: an overview of recent developments for CAD/CAM generated restorations[J]. Br Dent J, 2008,204(9):505-511.
doi: 10.1038/sj.bdj.2008.350 pmid: 18469768
[4] Pinheiro Tannure AL, Cunha AG, Borges Junior LA , et al. Wear at the implant-abutment interface of zir-conia abutments manufactured by three CAD/CAM systems[J]. Int J Oral Maxillofac Implants, 2017,32(6):1241-1250.
doi: 10.11607/jomi.5507 pmid: 29140369
[5] Laurent M, Scheer P, Dejou J , et al. Clinical evaluation of the marginal fit of cast crowns—validation of the silicone replica method[J]. J Oral Rehabil, 2008,35(2):116-122.
doi: 10.1111/j.1365-2842.2003.01203.x
[6] Borba M, Cesar PF, Griggs JA , et al. Adaptation of all-ceramic fixed partial dentures[J]. Dent Mater, 2011,27(11):1119-1126.
doi: 10.1016/j.dental.2011.08.004 pmid: 21920595
[7] Felton DA, Kanoy BE, Bayne SC , et al. Effect of in vivo crown margin discrepancies on periodontal health[J]. J Prosthet Dent, 1991,65(3):357-364.
doi: 10.1016/0022-3913(91)90225-L pmid: 2056454
[8] Kocaağaoğlu H, Albayrak H, Kilinc HI , et al. Effect of repeated ceramic firings on the marginal and inte- rnal adaptation of metal-ceramic restorations fabricated with different CAD-CAM technologies[J]. J Prosthet Dent, 2017,118(5):672-677.
[9] Patil A, Singh K, Sahoo S , et al. Comparative assess-ment of marginal accuracy of grade Ⅱ titanium and Ni-Cr alloy before and after ceramic firing: an in vitro study[J]. Eur J Dent, 2013,7(3):272-277.
doi: 10.4103/1305-7456.115409
[10] Fleming PS, Marinho V, Johal A . Orthodontic mea-surements on digital study models compared with plaster models: a systematic review[J]. Orthod Cra-niofac Res, 2011,14(1):1-16.
doi: 10.1111/j.1601-6343.2010.01503.x pmid: 21205164
[11] Seelbach P, Brueckel C, Wöstmann B . Accuracy of digital and conventional impression techniques and workflow[J]. Clin Oral Investig, 2013,17(7):1759-1764.
doi: 10.1007/s00784-012-0864-4 pmid: 23086333
[12] Zaruba M, Mehl A . Chairside systems: a current review[J]. Int J Comput Dent, 2017,20(2):123-149.
pmid: 28630955
[13] Miyazaki T, Hotta Y, Kunii J , et al. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience[J]. Dent Mater J, 2009,28(1):44-56.
doi: 10.4012/dmj.28.44 pmid: 19280967
[14] Jörgensen KD . A new method of recording the elastic recovery of dental impression materials[J]. Scand J Dent Res, 1976,84(3):175-182.
doi: 10.1111/j.1600-0722.1976.tb00476.x pmid: 1064127
[1] 杨活川综述 李彦审校. 义齿软衬和赝复体硅橡胶抗菌性的研究进展[J]. 国际口腔医学杂志, 2011, 38(5): 559-562.
[2] 许哲武综述 李彦审校. 颌面赝复体硅橡胶改性的研究进展[J]. 国际口腔医学杂志, 2010, 37(01): 98-98～100.
[3] 莫文娟综述 李彦审校. 影响颌面硅橡胶赝复体颜色的因素[J]. 国际口腔医学杂志, 2010, 37(01): 109-109～112.
[4] 隋磊, 巢永烈, 王娉婷, 周敏. “亲水性”硅橡胶口腔印模材料的润湿性研究[J]. 国际口腔医学杂志, 2009, 36(4): 405-408.
[5] 柳文娟 李四群 李志安 黄翠. 硅橡胶印模材料表面润湿性的研究进展[J]. 国际口腔医学杂志, 2003, 30(06): 464-466.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] 王昆润. 二甲亚砜和双氯芬酸并用治疗根尖周炎[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 汤庆奋,王学侠. 17β-雌二醇对人类阴道和口腔颊粘膜的渗透性[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 潘劲松. 颈总动脉指压和颈内动脉球囊阻断试验在大脑血液动力学中的不同影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 王昆润. 后牙冠根斜形牙折的治疗[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 杨锦波. 嵌合体防龋疫苗的研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 王昆润. 下颔骨成形术用网状钛板固定植骨块[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 汪月月,郭莉莉. 口腔机能与老化—痴呆危险因素流行病学研究[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 丁刚. 应用硬组织代用品种植体行丰颏术[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 戴青. 口腔念珠菌病的新分类[J]. 国际口腔医学杂志, 1999, 26(04): .
[10] 王金涛 刘美娟 孙宏晨 欧阳喈. 牙槽嵴牵张成骨[J]. 国际口腔医学杂志, 2004, 31(02): 146 -148 .