国际口腔医学杂志 ›› 2011, Vol. 38 ›› Issue (1): 31-33.doi: 10.3969/j.issn.1673-5749.2011.01.009

• 论著 • 上一篇    下一篇

氮化钛镀膜对纯钛铸件表面耐磨性的影响

佟宇1 郭天文2 肖慧军3 王菁2 梁海锋4   

  1. 1.空军杭州航空医学鉴定训练中心口腔科杭州310013; 2.第四军医大学口腔医院修复科西安710032; 3.解放军100 医院口腔科苏州215007; 4.西安工业大学陕西省薄膜技术与光学检测重点实验室西安710032
  • 收稿日期:2010-08-23 修回日期:2010-09-27 出版日期:2011-01-20 发布日期:2011-01-20
  • 通讯作者: 郭天文,Tel:029-84776252
  • 作者简介:佟宇(1976—),男,安徽人,主治医师,博士

Effects of titanium nitride coating on wear resistance of cast titanium

TONG Yu1, GUO Tian-wen2, XIAO Hui-jun3, WANG Jing2, LIANG Hai-feng4.   

  1. 1. Dept. of Stomatology, Hangzhou Aeromedicine Evaluation and Training Center of the Air Force, Hangzhou 310013, China; 2. Dept. of Prosthodontics, College of Stomatology, The Fourth Military Medical University, Xi’an 710032, China; 3. Dept. of Stomatology, Chinese People’s Liberation Army 100 Hospital, Suzhou 215007, China; 4. Shanxi Province Key Laboratory of Thin Film Technology and Optical Detection, Xi’an Technological University, Xi’an 710032, China
  • Received:2010-08-23 Revised:2010-09-27 Online:2011-01-20 Published:2011-01-20

摘要:

目的研究氮化钛(TiN)镀膜对纯钛铸件表面硬度和耐磨性的影响。方法应用闭合场非平衡磁控溅射(CFUBMS)方法在纯钛铸件表面制备TiN 薄膜,显微硬度仪测量纯钛铸件表面硬度,磨擦磨损试验评估其耐磨性。结果纯钛铸件表面应用CFUBMS 方法制备TiN 薄膜后,显微硬度明显增加,磨擦系数和磨损体积明显减小。结论CFUBMS 氮化钛镀膜对纯钛铸件有较好的磨损保护作用。

关键词: 氮化钛, 闭合场非平衡磁控溅射, 显微硬度, 耐磨性

Abstract: Objective To evaluate the effects of titanium nitride(TiN) coating on surface microhardness and wear resistance of cast titanium. Methods TiN film was deposited on cast titanium using closed field unbalanced magnetron sputtering(CFUBMS), after that microhardness and wear resistance of the cast titanium specimens were characterized by hardness testing and friction and wear test respectively. Results After TiN films were deposited on cast titanium, its microhardness increased significantly, wear volume and friction coefficient decreased significantly. Conclusion CFUBMS TiN coating can protect cast titanium from abrasion excessively.

Key words: titanium nitride, closed field unbalanced magnetron sputtering, microhardness, wear resistance

[1] 李韶容, 张茹, 侯本祥. 根管用药对牙齿力学性能的影响[J]. 国际口腔医学杂志, 2017, 44(3): 273-278.
[2] 兰静 王传勇 薛晶 蒋丽 李伟. 含纳米羟磷灰石的过氧化氢漂白剂对釉质表面的影响[J]. 国际口腔医学杂志, 2013, 40(4): 432-435.
[3] 撒悦, 王浙君, 王贻宁综述 蒋滔校. 牙齿外漂白中的显微硬度分析[J]. 国际口腔医学杂志, 2010, 37(02): 244-244~247.
[4] 张洁综述 李长义审校. 牙科材料耐磨损性能的影响因素[J]. 国际口腔医学杂志, 2009, 36(6): 723-725.
[5] 傅挥, 任晓莉, 杨艳, 尹路. 超越冷光牙美白剂临床与家庭装对釉质表面结构的影响[J]. 国际口腔医学杂志, 2009, 36(4): 391-393,397.
[6] 李爱霞 解保生 朱惠兰. 氮化钛及其在口腔医学中的研究和应用[J]. 国际口腔医学杂志, 2004, 31(03): 232-234.
[7] 刘昭慧. 再矿化定量检测方法[J]. 国际口腔医学杂志, 2002, 29(01): -.
[8] 李东育. 牙釉质显微硬度测定在龋病研究中的应用[J]. 国际口腔医学杂志, 1999, 26(03): -.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张新春. 桩冠修复与无髓牙的保护[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 王昆润. 长期单侧鼻呼吸对头颅发育有不利影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[3] 彭国光. 颈淋巴清扫术中颈交感神经干的解剖变异[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 杨凯. 淋巴化疗的药物运载系统及其应用现状[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 康非吾. 种植义齿下部结构生物力学研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 柴枫. 可摘局部义齿用Co-Cr合金的激光焊接[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 孟姝,吴亚菲,杨禾. 伴放线放线杆菌产生的细胞致死膨胀毒素及其与牙周病的关系[J]. 国际口腔医学杂志, 2005, 32(06): 458 -460 .
[8] 费晓露,丁一,徐屹. 牙周可疑致病菌对口腔黏膜上皮的粘附和侵入[J]. 国际口腔医学杂志, 2005, 32(06): 452 -454 .
[9] 赵兴福,黄晓晶. 变形链球菌蛋白组学研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .
[10] 庞莉苹,姚江武. 抛光和上釉对陶瓷表面粗糙度、挠曲强度及磨损性能的影响[J]. 国际口腔医学杂志, 2008, 35(S1): .