国际口腔医学杂志 ›› 2017, Vol. 44 ›› Issue (5): 583-586.doi: 10.7518/gjkq.2017.05.018

• 综述 • 上一篇    下一篇

定制牙托膜片切牙区厚度变化的影响因素

朱远兵, 汪俊   

  1. 上海交通大学医学院附属第九人民医院儿童口腔科 上海市口腔医学重点实验室 上海 200011
  • 收稿日期:2016-11-06 修回日期:2017-06-12 出版日期:2017-09-01 发布日期:2017-09-01
  • 通讯作者: 汪俊,教授,博士,Email:wangjun202@hotmail.com
  • 作者简介:朱远兵,硕士,Email:zhuyuanbing2016@163.com

Factors affecting the variation of incisor sheet thickness of a custom-made mouthguard during fabrication

Zhu Yuanbing, Wang Jun   

  1. Dept. of Pediatric Dentistry, The Ninth People’s Hospital, School of Medicine, Shanghai Jiao Tong University, Shanghai Key Laboratory of Stomatology, Shanghai 200011, China
  • Received:2016-11-06 Revised:2017-06-12 Online:2017-09-01 Published:2017-09-01

摘要: 佩戴运动牙托可以缓冲外力,降低颌面部损伤的风险。运动牙托种类较多,其中个性化定制运动牙托具有较好的保护作用和较高的舒适度而备受欢迎。个性化定制运动牙托的膜片加热后可发生延展,随后发生厚度变化,尤以切牙区膜片的厚度变化更能影响其保护性能;因此,笔者就影响个性化定制运动牙托膜片切牙区的厚度变化的膜片硬度、膜片形状和膜片表面设计等膜片因素,工作模厚度和工作模摆放角度等工作模因素,加压方法,夹持托盘形状、夹持方式和夹持托盘与工作模底座的距离等夹持因素,加压时间等的研究进展作一综述。

关键词: 运动牙托, 运动口腔医学, 牙外伤

Abstract: A mouthguard is a protective device that can buffer impact force and reduce the risk of maxillofacial trauma. A custom-made mouthguard enjoys great popularity owing to its superior comfort and stress dispersion effect. A mouthguard sheet is heated, then becomes soft, and stretches during fabrication; this process makes the mouthguard thinner and less effective. Accordingly, we will make a brief review of the factors(including hardness, shape, and surface design of sheets; thickness and position angle of work model; laminating methods; and shape of holding tray, holding condition, and distance between holding tray and work model) that affect the thickness variation of the incisal region of a custom-made mouthguard.

Key words: mouthguard, sports stomatology, dental trauma

中图分类号: 

  • R783.2
[1] Gawlak D, Mierzwińska-Nastalska E, Mańka-Malara K, et al. Comparison of usability properties of cus-tom-made and standard self-adapted mouthguards[J]. Dent Traumatol, 2014, 30(4):306-311.
[2] Tanaka Y, Miyanaga H, Maeda Y, et al. A method for detecting the deterioration in the shock absor-ption capability of mouthguards[J]. Int J Sports Med, 2015, 36(8):684-687.
[3] Takahashi M, Takahashi F, Morita O. Thickness of mouthguard sheet material after vacuum forming process depending on the thickness of mouthguard sheet[J]. Nihon Hotetsu Shika Gakkai Zasshi, 2008, 52(4):465-472.
[4] Collares K, Correa MB, Mohnsam da Silva IC, et al. Effect of wearing mouthguards on the physical performance of soccer and futsal players: a rando-mized cross-over study[J]. Dent Traumatol, 2014, 30(1):55-59.
[5] Kojima I, Takeda T, Nakajima K, et al. Thinning factors influence on custom-made mouthguards thermoforming[J]. Dent Traumatol, 2015, 31(2): 103-112.
[6] Takahashi M, Koide K, Mizuhashi F. Variation in mouthguard thickness due to different heating condi-tions during fabrication: part 2[J]. Dent Traumatol, 2015, 31(1):18-23.
[7] Mizuhashi F, Koide K, Takahashi M. Assessing change in mouthguard thickness according to the thickness of the original mouthguard sheet[J]. Dent Traumatol, 2014, 30(6):468-471.
[8] Takahashi M, Koide K, Mizuhashi F. Influence of color difference of mouthguard sheet on thickness after forming[J]. J Prosthodont Res, 2012, 56(3):194- 203.
[9] Takahashi M, Koide K, Mizuhashi F. Influence of sheet material shape on the thickness and fit of mouthguards[J]. Dent Traumatol, 2014, 30(6):455- 460.
[10] Takahashi M, Koide K, Mizuhashi F, et al. Investiga-tion of vacuum forming techniques for reduction of loss in mouthguard thickness: part 2—effects of sheet grooving and thermal shrinkage[J]. Dent Trau-matol, 2015, 31(4):314-317.
[11] Takahashi M, Koide K, Mizuhashi F. Differences in the thickness of mouthguards fabricated from ethy-lene vinyl acetate copolymer sheets with differently arranged V-shaped grooves: part 2—effect of shape on the working model[J]. Dent Traumatol, 2014, 30 (6):472-476.
[12] Takahashi M, Koide K, Mizuhashi F. Difference in the thickness of mouthguards fabricated from ethy-lene-vinyl acetate co-polymer sheets with differently arranged V-shaped grooves[J]. J Prosthodont Res, 2013, 57(3):169-178.
[13] Takahashi M, Koide K, Mizuhashi F. Difference in the thickness of mouthguards fabricated from step-type polyolefin-polystyrene copolymer sheets dif-ferently arranged V-shaped grooves[J]. J Prosthodont Res, 2012, 56(4):281-286.
[14] Takahashi M, Koide K, Iwasaki S. Thickness of mouthguard sheets after vacuum-pressure formation: influence of mouthguard sheet material[J]. Dent Trau-matol, 2016, 32(3):201-205.
[15] Del Rossi G, Leyte-Vidal MA. Fabricating a better mouthguard. Part Ⅰ: factors influencing mouthguard thinning[J]. Dent Traumatol, 2007, 23(3):149-154.
[16] Geary JL, Kinirons MJ. Post thermoforming dimen-sional changes of ethylene vinyl acetate used in custom-made mouthguards for trauma prevention—a pilot study[J]. Dent Traumatol, 2008, 24(3):350-355.
[17] Mizuhashi F, Koide K, Takahashi M. Variations in mouthguard thickness according to fabrication me-thod[J]. Dent Traumatol, 2015, 31(2):130-135.
[18] Mizuhashi F, Koide K, Takahashi M. Thickness and fit of mouthguards according to a vacuum-forming process[J]. Dent Traumatol, 2013, 29(4):307-312.
[19] Waked EJ, Caputo AA. Thickness and stiffness cha-racteristics of custom-made mouthguard materials[J]. Quintessence Int, 2005, 36(6):462-466.
[20] Takahashi M, Koide K, Mizuhashi F. Optimal heating conditions for forming a mouthguard using a circle tray: effect of different conditions on the thic-kness and fit of formed mouthguards[J]. J Prostho-dont Res, 2014, 58(3):171-176.
[21] Mizuhashi F, Koide K, Takahashi M. Thickness and fit of mouthguard according to changing the holding conditions and the heating conditions of the mouth-guard sheet[J]. Dent Traumatol, 2014, 30(2):140- 146.
[22] Mizuhashi F, Koide K, Takahashi M, et al. A method to maintain the thickness of the mouthguard after the vacuum forming process: changes of the holding conditions of the mouthguard sheet[J]. Dent Trau-matol, 2012, 28(4):291-295.
[1] 马心笛,陈蕾. 完全脱位牙再植的牙髓、牙周膜愈合:从生物学基础到牙外伤指南[J]. 国际口腔医学杂志, 2020, 47(3): 336-344.
[2] 罗罡,汪俊. 防护牙托的材料和结构对其性能的影响[J]. 国际口腔医学杂志, 2008, 35(S1): -.
[3] 罗罡综述 汪俊审校. 公众对儿童牙外伤的了解情况[J]. 国际口腔医学杂志, 2008, 35(6): 678-678~680.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 吴奕添综述 王家伟审校. TiUnite 表面种植体的临床研究进展[J]. 国际口腔医学杂志, 2010, 37(02): 218 -218~220 .
[2] 冯正虎, 李春青, 王凌, 韩冰, 聂红兵, 苏雪莲. 血管内皮生长因子-C 在不同浸润方式的舌鳞状细胞癌中的表达[J]. 国际口腔医学杂志, 2011, 38(1): 7 -9 .
[3] 石冰. 隐形切口技术在唇裂唇鼻畸形整复术中的应用[J]. 国际口腔医学杂志, 2013, 40(4): 421 -425 .
[4] 蒋德鲜. 拔除第一双尖牙对垂直距离的影响[J]. 国际口腔医学杂志, 2000, 27(02): .
[5] 史建陆. 正畸牙移动牙周膜微循环变化研究[J]. 国际口腔医学杂志, 1999, 26(01): .
[6] 蒋欣泉. 自体涎腺移植预防放射性口干症的可行性研究[J]. 国际口腔医学杂志, 2001, 28(02): .
[7] 吴波. 四环素控释纤维治疗难治性牙周炎[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 陈渊华综述 蔡玉惠审校. 口腔仪器比色技术的研究进展[J]. 国际口腔医学杂志, 2009, 36(5): 613 -615 .
[9] 武影. 乙二胺四乙酸与牙周组织修复[J]. 国际口腔医学杂志, 2004, 31(S1): .
[10] 徐艳,丁一. 菌斑化学控制的研究进展[J]. 国际口腔医学杂志, 2001, 28(02): .