国际口腔医学杂志 ›› 2014, Vol. 41 ›› Issue (3): 289-291.doi: 10.7518/gjkq.2014.03.010

• 论著 • 上一篇    下一篇

K锉初步预备和扭矩对机用ProTaper抗折性能的影响

班建东 李军科 侯燕 杨晓瑞 王双庆   

  1. 河北省邢台市眼科医院口腔科 邢台 054000
  • 收稿日期:2013-12-12 修回日期:2014-02-12 出版日期:2014-05-01 发布日期:2014-05-01
  • 通讯作者: 班建东,主治医师,硕士,Email:5561754@qq.com
  • 作者简介:班建东,主治医师,硕士,Email:5561754@qq.com

Influence of K file preflaring and torque on the separation of ProTaper rotary instruments

Ban Jiandong, Li Junke, Hou Yan, Yang Xiaorui, Wang Shuangqing   

  1. Dept. of Stomatology, Eye Hospital of Xingtai, Xingtai 054000, China
  • Received:2013-12-12 Revised:2014-02-12 Online:2014-05-01 Published:2014-05-01

摘要:

目的 探讨K锉初步预备和扭矩对机用ProTaper抗折性能的影响。方法 分别计算各组机用ProTaper器械折断或变形前所预备的S型树脂模拟根管的数目。结果 A1组(模拟根管未经K锉初步预备)S1预备了13个模拟根管; B1组(模拟根管经K锉初步预备)S1预备了36个模拟根管;A2组(低扭矩组)S2预备了17个模拟根管;B2组(高扭矩组)S2预备了18个模拟根管;A3组(低扭矩组)F1预备了14个模拟根管;B3组(高扭矩组)F1预备了14个模拟根管;A4组(低扭矩组)F2预备了6个模拟根管;B4组(高扭矩组)F2预备了6个模拟根管。结论 根管经K锉初步预备可降低机用ProTaper器械折断的发生;扭矩的高低对机用ProTaper器械的抗折性能没有明显影响。

关键词: K锉, 扭矩, ProTaper器械

Abstract:

Objective This study aims to investigate the influence of K file preflaring and torque on the failure of rotary nickel-titanium ProTaper instruments. Methods An in vitro method was carried out to calculate the mean number of S-shaped simulated root canals before file fracture or deformation under different conditions. Results Group A1(S1 on simulators with no preflaring) shaped 13 blocks, and Group B1(S1 on manually preflared simulators) shaped 36 blocks. Group A2(S2 with low torque) shaped 17 blocks, and Group B2(S2 with high torque) shaped 18 blocks. Group A3 (F1 with low torque) shaped 14 blocks, and Group B3(F1 with high torque) shaped 14 blocks. Group A4 (F2 with low torque) shaped 6 blocks, and Group B4(F2 with high torque) shaped 6 blocks. Conclusion K file preflaring is a major determinant in reducing the failure of rotary nickel–titanium ProTaper instruments, whereas torque exhibiting no influence on the failure of rotary nickel-titanium ProTaper instruments.

Key words: K file, torque, ProTaper rotary instruments

中图分类号: 

  • R 781.05
[1] 关卿 金涛 顾永春 杨犇 倪龙兴. 3种根管预备器械在弯曲根管中扭转负载下的三维有限元分析[J]. 国际口腔医学杂志, 2015, 42(3): 269-272.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张新春. 桩冠修复与无髓牙的保护[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 王昆润. 长期单侧鼻呼吸对头颅发育有不利影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[3] 彭国光. 颈淋巴清扫术中颈交感神经干的解剖变异[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 杨凯. 淋巴化疗的药物运载系统及其应用现状[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 康非吾. 种植义齿下部结构生物力学研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 柴枫. 可摘局部义齿用Co-Cr合金的激光焊接[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 孟姝,吴亚菲,杨禾. 伴放线放线杆菌产生的细胞致死膨胀毒素及其与牙周病的关系[J]. 国际口腔医学杂志, 2005, 32(06): 458 -460 .
[8] 费晓露,丁一,徐屹. 牙周可疑致病菌对口腔黏膜上皮的粘附和侵入[J]. 国际口腔医学杂志, 2005, 32(06): 452 -454 .
[9] 赵兴福,黄晓晶. 变形链球菌蛋白组学研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .
[10] 庞莉苹,姚江武. 抛光和上釉对陶瓷表面粗糙度、挠曲强度及磨损性能的影响[J]. 国际口腔医学杂志, 2008, 35(S1): .