国际口腔医学杂志 ›› 2017, Vol. 44 ›› Issue (6): 726-730.doi: 10.7518/gjkq.2017.06.020
李学盛1, 李鸿波2
Li Xuesheng1, Li Hongbo2
摘要: 固定修复体是口腔临床常用的修复方式之一,融合了美学性能和舒适度,备受医生、患者的青睐。适合性是指修复体组织面与基牙预备体之间的密合度,与修复体完全就位于基牙上相关,反映了修复体制作精密的程度,是检测口腔材料性能、修复体最终质量和远期效果的关键指标之一。目前,常用来评估固定修复体的适合性的方法有:临床探查法、肉眼观察法、显微镜直接测量法、印模技术法、片切法、Micro-CT法等。本文将就这些评价方法及研究进展作一综述。
中图分类号:
[1] 翁蓓军, 黄伟昊, 李国强. CAD/CAM全瓷冠与激光熔覆烤瓷冠边缘适合性的研究[J]. 口腔材料器械杂志, 2014, 23(4):185-188. Weng BJ, Huang WH, Li GQ. Comparative study of marginal adaptation of crowns by selective laser melting and CAD/CAM methods[J]. Chin J Dent Mater Dev, 2014, 23(4):185-188. [2] 张艳, 李江, 殷悦, 等. CAD/CAM全瓷冠边缘适合性的评价[J]. 口腔医学研究, 2010, 26(4):541-543. Zhang Y, Li J, Yin Y, et al. Evaluation on the mar-ginal adaptation of CAD/CAM ceramic crown[J]. J Oral Sci Res, 2010, 26(4):541-543. [3] Gwinner FP, Bottino MA, Nogueira-Junior L, et al. Effect of finish line on marginal fit of sintered gold copings[J]. Braz Dent J, 2013, 24(4):322-325. [4] Azar MS, Lehmann KM, Dietrich H, et al. Effect of preparation depth differences on the marginal fit of zirconia crown copings: an in vitro study[J]. Int J Prosthodont, 2011, 24(3):264-266. [5] Chandrashekar S, Savadi RC, Dayalan M, et al. A comparitive evaluation of the marginal adaptation of zirconium coping and nickel-chromium coping using shoulder finish line design: an in vitro study[J]. J Indian Prosthodont Soc, 2012, 12(4):248-251. [6] Almeida e Silva JS, Erdelt K, Edelhoff D, et al. Mar-ginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional im-pression techniques[J]. Clin Oral Investig, 2014, 18 (2):515-523. [7] Zarauz C, Valverde A, Martinez-Rus F, et al. Clinical evaluation comparing the fit of all-ceramic crowns obtained from silicone and digital intraoral impre-ssions[J]. Clin Oral Investig, 2016, 20(4):799-806. [8] Ueda K, Beuer F, Stimmelmayr M, et al. Fit of 4-unit FDPs from CoCr and zirconia after conven-tional and digital impressions[J]. Clin Oral Investig, 2016, 20(2):283-289. [9] Reich S, Uhlen S, Gozdowski S, et al. Measurement of cement thickness under lithium disilicate crowns using an impression material technique[J]. Clin Oral Investig, 2011, 15(4):521-526. [10] Kim KB, Kim WC, Kim HY, et al. An evaluation of marginal fit of three-unit fixed dental prostheses fabricated by direct metal laser sintering system[J]. Dent Mater, 2013, 29(7):e91-e96. [11] Tamac E, Toksavul S, Toman M. Clinical marginal and internal adaptation of CAD/CAM milling, laser sintering, and cast metal ceramic crowns[J]. J Pros-thet Dent, 2014, 112(4):909-913. [12] Xu D, Xiang N, Wei B. The marginal fit of selective laser melting-fabricated metal crowns: an in vitro study[J]. J Prosthet Dent, 2014, 112(6):1437-1440. [13] Nesse H, Ulstein DM, Vaage MM, et al. Internal and marginal fit of cobalt-chromium fixed dental pros-theses fabricated with 3 different techniques[J]. J Prosthet Dent, 2015, 114(5):686-692. [14] Huang Z, Zhang L, Zhu J, et al. Clinical marginal and internal fit of metal ceramic crowns fabricated with a selective laser melting technology[J]. J Pros-thet Dent, 2015, 113(6):623-627. [15] Park JK, Lee WS, Kim HY, et al. Accuracy evalua-tion of metal copings fabricated by computer-aided milling and direct metal laser sintering systems[J]. J Adv Prosthodont, 2015, 7(2):122-128. [16] Kim KB, Kim JH, Kim WC, et al. Evaluation of the marginal and internal gap of metal-ceramic crown fabricated with a selective laser sintering technology: two- and three-dimensional replica techniques[J]. J Adv Prosthodont, 2013, 5(2):179-186. [17] 陈思宇, 万乾炳. 多次热处理对IPS e.max Press全瓷冠适合性的影响[J]. 广东医学, 2011, 32(17): 2291-2293. Chen SY, Wan QB. Influence on multiple heat treat-ments on IPS e.max Press all ceramic crowns[J]. Guangdong Med J, 2011, 32(17):2291-2293. [18] 丁伟山, 黄爱玲, 胡以俊, 等. CAD/CAM氧化锆底层冠适合性的实验研究[J]. 口腔颌面修复学杂志, 2010, 11(3):144-146. Ding WS, Huang AL, Hu YJ, et al. Evalution of the adaptation of cercon CAD/CAM copings[J]. Chin J Prosthodont, 2010, 11(3):144-146. [19] 谭发兵, 王璐, 付钢, 等. 不同光学印模法对全瓷冠边缘和内部适合性影响的实验研究[J]. 华西口腔医学杂志, 2010, 28(1):29-33. Tan FB, Wang L, Fu G, et al. An experimental study on the effect of different optical impression methods on marginal and internal fit of all-ceramic crowns[J]. West Chin J Stomatol, 2010, 28(1):29-33. [20] Han HS, Yang HS, Lim HP, et al. Marginal accuracy and internal fit of machine-milled and cast titanium crowns[J]. J Prosthet Dent, 2011, 106(3):191-197. [21] Guess PC, Vagkopoulou T, Zhang Y, et al. Marginal and internal fit of heat pressed versus CAD/CAM fabricated all-ceramic onlays after exposure to thermo-mechanical fatigue[J]. J Dent, 2014, 42(2):199-209. [22] 吴丽艳, 苏晓晖, 王磊, 等. 微波烧结和常规烧结氧化锆全瓷冠适合性的比较[J]. 临床口腔医学杂志, 2014, 30(7):445-447. Wu LY, Su XH, Wang L, et al. Comparison the fitness of zirconia ceramic crown sintered by micro-wave sintering method and conventional sintering method[J]. J Clin Stomatol, 2014, 30(7):445-447. [23] 张志清, 孙艳华. 选择性激光熔化基底冠与铸造基底冠适合性的比较研究[J]. 中国美容医学, 2014, 23(23):1995-1997. Zhang ZQ, Sun YH. Comparative study of the com-patibility of selective laser melting basement crown and the casting basement crown[J]. Chin J Aesthet Med, 2014, 23(23):1995-1997. [24] 吴丹, 孙健. 全冠修复体适合性的研究方法[J]. 临床口腔医学杂志, 2012, 28(6):376-377. Wu D, Sun J. Methods for the study of the adaptation of full crown restorations[J]. J Clin Stomatol, 2012, 28(6):376-377. [25] Demir N, Ozturk AN, Malkoc MA. Evaluation of the marginal fit of full ceramic crowns by the microcom-puted tomography(micro-CT) technique[J]. Eur J Dent, 2014, 8(4):437-444. [26] Borba M, Miranda WG Jr, Cesar PF, et al. Evalua-tion of the adaptation of zirconia-based fixed partial dentures using micro-CT technology[J]. Braz Oral Res, 2013, 27(5):396-402. [27] Wakabayashi K, Sohmura T, Nakamura T, et al. New evaluation method by microfocus radiograph CT for 3D assessment of internal adaptation of all-ceramic crowns[J]. Dent Mater J, 2005, 24(3):362- 367. [28] Mously HA, Finkelman M, Zandparsa R, et al. Mar-ginal and internal adaptation of ceramic crown res-torations fabricated with CAD/CAM technology and the heat-press technique[J]. J Prosthet Dent, 2014, 112(2):249-256. |
[1] | 赵莹,杨柳,谢宇,张艳,魏溦,李江. 扫描对象对计算机辅助设计/计算机辅助制造钴铬烤瓷冠精确性影响的研究[J]. 国际口腔医学杂志, 2018, 45(6): 686-689. |
[2] | 喻娜 马超逸 岳莉 于海洋. 不同种类的固定修复体市场需求分析[J]. 国际口腔医学杂志, 2012, 39(4): 453-455. |
[3] | 史琦综述王燕一审校. 口腔内金属对头颅磁共振成像的影响和减少伪影方法的研究进展[J]. 国际口腔医学杂志, 2010, 37(6): 711-713. |
[4] | 滕吉利, 骆琳, 梁星, 王航. Ceramage 聚合瓷冠边缘适合性和抗折强度的研究[J]. 国际口腔医学杂志, 2010, 37(3): 277-277~279,283. |
[5] | 孟玉坤 . 全瓷冠桥修复材料的临床选择[J]. 国际口腔医学杂志, 2010, 37(01): 1-6. |
[6] | 张凤,魏素华. 嵌体适合性分析的实验方法[J]. 国际口腔医学杂志, 2008, 35(S1): -. |
[7] | 邬烈,骆小平,舒成军,. 不同厚度纯钛基底冠适合性的比较研究[J]. 国际口腔医学杂志, 2007, 34(05): 328-330. |
[8] | 吉宁,王少安. 瓷全冠边缘适合性的影响因素[J]. 国际口腔医学杂志, 2005, 32(02): 148-150. |
[9] | 赵勇 宫苹. 种植义齿被动适合性的影响因素及提高方法[J]. 国际口腔医学杂志, 2003, 30(04): 316-317. |
[10] | 曾东. 钛合金超塑性及义齿基托成型[J]. 国际口腔医学杂志, 2002, 29(01): -. |
[11] | 王萍. 化学药物在牙龈收缩中的应用[J]. 国际口腔医学杂志, 2000, 27(03): -. |
|