国际口腔医学杂志 ›› 2017, Vol. 44 ›› Issue (2): 214-217.doi: 10.7518/gjkq.2017.02.020
李洪婷1, 刘天爽2
Li Hongting, Liu Tianshuang
摘要: 口腔材料与材料之间、修复体与牙体组织之间良好的粘接是临床修复成功的保证。等离子体是气体在高能量作用下部分或完全电离产生的气体云,具有高效率、低能耗、安全和无二次污染等优点。等离子体可改变聚合物的表面结构并形成一个惰性的表面保护层,高材料的润湿性、生物相容性和耐用性。等离子体表面处理可提高丙烯酸树脂基托、纤维增强复合材料、玻璃陶瓷、多晶陶瓷和复合树脂等与各种基质之间的粘接力。本文就目前国内外等离子体及其在口腔材料粘接性方面的研究进展作一综述,旨在为等离子体广泛地应用于口腔临床提供理论依据。
中图分类号:
[1] Nam SH, Lee HW, Cho SH, et al. High-efficiency tooth bleaching using non-thermal atmospheric pre-ssure plasma with low concentration of hydrogen peroxide[J]. J Appl Oral Sci, 2013, 21(3):265-270. [2] Chang JW, Kang SU, Shin YS, et al. Non-thermal atmospheric pressure plasma induces apoptosis in oral cavity squamous cell carcinoma: involvement of DNA-damage-triggering sub-G 1 arrest via the ATM/p53 pathway[J]. Arch Biochem Biophys, 2014, 545: 133-140. [3] Kim JH, Lee MA, Han GJ, et al. Plasma in dentistry: a review of basic concepts and applications in den-tistry[J]. Acta Odontol Scand, 2014, 72(1):1-12. [4] Zhang H, Fang J, Hu Z, et al. Effect of oxygen plasma treatment on the bonding of a soft liner to an acrylic resin denture material[J]. Dent Mater J, 2010, 29(4): 398-402. [5] 王萍, 程祥荣, 谢光勇. 低温等离子体改性基托树脂表面粘接性能的研究[J]. 口腔医学研究, 2007, 23(2):144-146. Wang P, Cheng XR, Xie GY. Effect of low tempera-ture plasma treatment on the bonding strength of denture base[J]. J Oral Sci Res, 2007, 23(2):144-146. [6] 张怀勤, 方江邻. 等离子体对聚甲基丙烯酸甲酯改性效果持久性的研究[J]. 口腔材料器械杂志, 2008, 17(1):5-7 Zhang HQ, Fang JL. Durability of modification on plasma-treated polymethylmethacrylate surface[J]. Chin J Dent Mater Dev, 2008, 17(1):5-7. [7] Cökeliler D, Erkut S, Zemek J, et al. Modification of glass fibers to improve reinforcement: a plasma po-lymerization technique[J]. Dent Mater, 2007, 23(3): 335-342. [8] Yavirach P, Chaijareenont P, Boonyawan D, et al. Effects of plasma treatment on the shear bond stren-gth between fiber-reinforced composite posts and resin composite for core build-up[J]. Dent Mater J, 2009, 28(6):686-692. [9] 吴峻岭, 张强. 不同表面处理技术影响纤维桩与树脂核粘接强度的实验研究[J]. 口腔颌面修复学杂志, 2009, 10(5):306-308. Wu JL, Zhang Q. Study on the bond strength of fiber post and resin core using different surface processing technology[J]. Chin J Prosthod, 2009, 10(5):306- 308. [10] Ye H, Zhang Q, Sun K, et al. Aging effects of fiber post surface treatment with nonthermal plasma[J]. Int J Prosthodont, 2012, 25(5):509-511. [11] Costa Dantas MC, do Prado M, Costa VS, et al. Com-parison between the effect of plasma and chemical treatments on fiber post surface[J]. J Endod, 2012, 38(2):215-218. [12] Cho BH, Han GJ, Oh KH, et al. The effect of plasma polymer coating using atmospheric-pressure glow discharge on the shear bond strength of com-posite resin to ceramic[J]. J Mater Sci, 2010, 46(8):2755- 2763. [13] Han GJ, Chung SN, Chun BH, et al. Effect of the applied power of atmospheric pressure plasma on the adhesion of composite resin to dental ceramic[J]. J Adhes Dent, 2012, 14(5):461-469. [14] Vargas MA, Bergeron C, Diaz-Arnold A. Cementing all-ceramic restorations: recommendations for suc-cess[J]. J Am Dent Assoc, 2011, 142(Suppl 2):20S- 24S. [15] Derand T, Molin M, Kvam K. Bond strength of a composite luting agent to alumina ceramic surfaces [J]. Acta Odontol Scand, 2006, 64(4):227-230. [16] Piascik JR, Wolter SD, Stoner BR. Development of a novel surface modification for improved bonding to zirconia[J]. Dent Mater, 2011, 27(5):e99-e105. [17] Pashley DH, Tay FR, Breschi L, et al. State of the art etch-and-rinse adhesives[J]. Dent Mater, 2011, 27 (1):1-16. [18] Ritts AC, Li H, Yu Q, et al. Dentin surface treatment using a non-thermal argon plasma brush for inter-facial bonding improvement in composite restora-tion[J]. Eur J Oral Sci, 2010, 118(5):510-516. [19] Han GJ, Kim JH, Chung SN, et al. Effects of non-thermal atmospheric pressure pulsed plasma on the adhesion and durability of resin composite to dentin [J]. Eur J Oral Sci, 2014, 122(6):417-423. |
[1] | 吴礼安. 部分断冠粘接术在儿童恒前牙复杂冠根折中的初步应用[J]. 国际口腔医学杂志, 2023, 50(6): 623-631. |
[2] | 薛晶, 杨静. 基于循证实践的Ⅱ类洞复合树脂修复的操作要点[J]. 国际口腔医学杂志, 2023, 50(4): 375-387. |
[3] | 丁景瑜,田子璐,王惠敏,朱轩言,杨宇斌,朱松. 即刻牙本质封闭的研究进展[J]. 国际口腔医学杂志, 2022, 49(1): 121-124. |
[4] | 王剑. 浅谈嵌体和高嵌体修复的临床应用[J]. 国际口腔医学杂志, 2021, 48(5): 497-505. |
[5] | 刘昱晨,田敏,牛丽娜,方明. 粘接固定桥存留率的影响因素及提高对策[J]. 国际口腔医学杂志, 2021, 48(5): 585-591. |
[6] | 黎敏,华成舸,蒋丽. 提高氧化锆陶瓷粘接性能新技术的研究进展[J]. 国际口腔医学杂志, 2021, 48(4): 485-490. |
[7] | 钮晔,曾芸婷,曾悦翔,张泽宇,肖立伟. 数字化技术在直丝弓托槽间接粘接中的应用[J]. 国际口腔医学杂志, 2021, 48(4): 491-496. |
[8] | 沈冬妮,施莹,傅柏平. 后牙牙合贴面修复的研究进展[J]. 国际口腔医学杂志, 2021, 48(3): 287-291. |
[9] | 刘敏,张宽收,刘青梅. 激光蚀刻牙体组织在直接粘接技术中的研究进展[J]. 国际口腔医学杂志, 2021, 48(3): 292-296. |
[10] | 刘恩言,李明云. 茶多酚类化合物在牙本质粘接中应用的研究进展[J]. 国际口腔医学杂志, 2020, 47(6): 732-738. |
[11] | 马凯,李昊,赵红梅,王永亮,刘杰,柏娜. 低温氩氧等离子体处理的无机牛骨对MC3T3-E1细胞黏附、增殖及分化的影响[J]. 国际口腔医学杂志, 2020, 47(3): 278-285. |
[12] | 韩雨亭,吴燕茹. 应用龈壁提升术修复牙体缺损的研究进展[J]. 国际口腔医学杂志, 2019, 46(3): 349-355. |
[13] | 秦娇娇,焦珊,王成坤. Er:YAG和Nd:YAG激光对牙本质与瓷修复体粘接面粘接强度影响的研究进展[J]. 国际口腔医学杂志, 2019, 46(3): 361-366. |
[14] | 侯晔坡,高杰. Er:YAG激光照射对牙科陶瓷材料粘接影响的研究进展[J]. 国际口腔医学杂志, 2019, 46(1): 68-72. |
[15] | 谭欣,于海洋. 模拟髓腔压力在牙本质粘接强度研究中的应用[J]. 国际口腔医学杂志, 2018, 45(6): 723-727. |
|