国际口腔医学杂志 ›› 2020, Vol. 47 ›› Issue (1): 1-9.doi: 10.7518/gjkq.2020001

• 专家笔谈 •    下一篇

全口义齿数字化技术分析

王勇()   

  1. 国家口腔疾病临床医学研究中心 北京 100081
  • 收稿日期:2019-07-02 修回日期:2019-10-09 出版日期:2020-01-01 发布日期:2020-01-01
  • 通讯作者: 王勇
  • 作者简介:王勇,教授级高级工程师,硕士,Email:kqcadc@bjmu.edu.cn|作者简介:王勇,教授级高级工程师,博士生导师。北京大学口腔医学院•口腔医学数字化研究中心主任,口腔数字化医疗技术和材料国家工程实验室总工程师,中华口腔医学会理事,北京口腔医学会数字化口腔医学专业委员会主任委员,中华口腔医学会口腔医学计算机专业委员会副主任委员。
  • 基金资助:
    国家重点研发计划专项(2018YFB1106903);宁夏回族自治区重点研发计划重点项目课题(2018BEG02012)

Analysis of digital complete denture technology

Wang Yong()   

  1. computer-aided manufac-turing
  • Received:2019-07-02 Revised:2019-10-09 Online:2020-01-01 Published:2020-01-01
  • Contact: Yong Wang
  • Supported by:
    This study was supported by National Key Research and Development Program(2018YFB1106903);Key Project of Ningxia Hui Autonomous Region Key Research and Development Program(2018BEG02012)

摘要:

全口义齿是口腔修复中最为复杂的一类修复体,在完成过程中临床医生和技师都需要较多的临床操作步骤和较高的技术要求。随着全球社会的老龄化,无牙颌患者仍占据相对较高的数量。数字化技术如何在全口义齿全流程中发挥作用,成为口腔科研和临床应用的热点。笔者根据文献学习和自主研发数字化全口义齿的体会,谈谈对数字化全口义齿技术的认识和分析,并就患者就诊次数、医生端技术特点(初印模、终印模、颌位关系、试戴、初戴等)、技师端技术特点,以及数字化全口义齿的发展趋势进行讨论。

关键词: 全口义齿, 三维扫描, 数字化设计, 数字化加工

中图分类号: 

  • R783.6
[1] 冯海兰, 徐军 . 口腔修复学[M]. 2版. 北京: 北京大学医学出版社, 2013.
Feng HL, Xu J. Prosthodontics[M]. 2nd ed. Beijing: Peking University Medical Press, 2013.
[2] Zarb G, Bolender G, Eckert S . Prosthodontic treat-ment for edentulous patients[M]. 13th ed. St. Louis: Elsevier Mosby, 2013: 170-179.
[3] 王兴 . 第四次全国口腔健康流行病学调查报告[M]. 北京: 人民卫生出版社, 2018.
Wang X. The fourth national oral health epide-miological survey report[M]. Beijing: People’s Me-dical Publishing House, 2018.
[4] Kattadiyil MT, Jekki R, Goodacre CJ , et al. Com-parison of treatment outcomes in digital and conven-tional complete removable dental prosjournal fabrica-tions in a predoctoral setting[J]. J Prosthet Dent, 2015,114(6):818-825.
[5] Bidra AS, Farrell K, Burnham D, et al . Prospective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures:clinical and patient-centered outcomes[J].J Prosthet Dent, 2016, 115(5):578-586.e1.
[6] Saponaro PC, Yilmaz B, Heshmati RH , et al. Clinical performance of CAD-CAM-fabricated complete dentures: a cross-sectional study[J]. J Prosthet Dent, 2016,116(3):431-435.
[7] Srinivasan M, Schimmel M, Naharro M , et al. CAD/CAM milled removable complete dentures: time and cost estimation study[J]. J Dent, 2019,80:75-79.
[8] McLaughlin JB, Ramos V Jr . Complete denture fabrication with CAD/CAM record bases[J]. J Pros-thet Dent, 2015,114(4):493-497.
[9] Infante L, Yilmaz B , McGlumphy E, et al. Fabrica-ting complete dentures with CAD/CAM technology[J]. J Prosthet Dent, 2014,111(5):351-355.
[10] AlHelal A, AlRumaih HS, Kattadiyil MT , et al. Comparison of retention between maxillary milled and conventional denture bases: a clinical study[J]. J Prosthet Dent, 2017,117(2):233-238.
[11] Srinivasan M, Cantin Y, Mehl A , et al. CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness[J]. Clin Oral Investig, 2017,21(6):2007-2019.
[12] Yilmaz B, Azak AN, Alp G , et al. Use of CAD-CAM technology for the fabrication of complete dentures: an alternative technique[J]. J Prosthet Dent, 2017,118(2):140-143.
[13] Wimmer T, Eichberger M, Lümkemann N , et al. Ac-curacy of digitally fabricated trial dentures[J]. J Prosthet Dent, 2018,119(6):942-947.
[14] Wimmer T, Gallus K, Eichberger M , et al. Complete denture fabrication supported by CAD/CAM[J]. J Prosthet Dent, 2016,115(5):541-546.
[15] Schweiger J, Stumbaum J, Edelhoff D , et al. Syste-matics and concepts for the digital production of complete dentures: risks and opportunities[J]. Int J Comput Dent, 2018,21(1):41-56.
[16] Baba NZ , AlRumaih HS, Goodacre BJ, et al. Current techniques in CAD/CAM denture fabrication[J]. Gen Dent, 2016,64(6):23-28.
[17] Baba NZ . Materials and processes for CAD/CAM complete denture fabrication[J]. Curr Oral Heal Rep, 2016,3(3):203-208.
[18] Bilgin MS, Erdem A, Aglarci OS , et al. Fabricating complete dentures with CAD/CAM and RP techno-logies[J]. J Prosthodont, 2015,24(7):576-579.
[19] Schwindling FS, Stober T . A comparison of two di-gital techniques for the fabrication of complete re-movable dental prostheses: a pilot clinical study[J]. J Prosthet Dent, 2016,116(5):756-763.
[20] D’Amato S, Venezia P . Digital immediate denture—a paradigm shift[J]. Spectr Dialog, 2017,16(2):12-18.
[21] Bonnet G, Batisse C, Bessadet M , et al. A new digital denture procedure: a first practitioners appraisal[J]. BMC Oral Health, 2017,17(1):155.
[22] Lo Russo L, Salamini A . Removable complete digital dentures: a workflow that integrates open techno-logies[J]. J Prosthet Dent, 2018,119(5):727-732.
[23] Han WL, Li YF, Zhang Y , et al. Design and fabrica-tion of complete dentures using CAD/CAM techno-logy[J]. Medicine (Baltimore), 2017,96(1):e5435.
[24] 北京大学口腔医学院 .功能易适数字化全口义齿的制作方法和设备: 国际发明专利PCT,WO/2017/181397[P]. 2017 -10-26[2017-11-17].
Peking University School and Hospital of Stoma-tology .Method and apparatus for making functional ,digital full denture: international invention patents PCT,WO/2017/181397[P]. 2017-10-26[2017-11-17].
[25] Kattadiyil MT, Goodacre CJ, Baba NZ . CAD/CAM complete dentures: a review of two commercial fabrication systems[J]. J Calif Dent Assoc, 2013,41(6):407-416.
[26] Bidra AS, Taylor TD, Agar JR . Computer-aided technology for fabricating complete dentures: sys-tematic review of historical background, current status, and future perspectives[J]. J Prosthet Dent, 2013,109(6):361-366.
[27] Kattadiyil MT ,AlHelal A.An update on computer-engineered complete dentures: a systematic review on clinical outcomes[J]. J Prosthet Dent, 2017,117(4):478-485.
[28] Kattadiyil MT ,AlHelal A,Goodacre BJ.Clinical complications and quality assessments with com-puter-engineered complete dentures: a systematic review[J]. J Prosthet Dent, 2017,117(6):721-728.
[29] Janeva N, Kovacevska G, Janev E . Complete den-tures fabricated with CAD/CAM technology and a traditional clinical recording method[J]. Open Access Maced J Med Sci, 2017,5(6):785-789.
[30] Steinmassl PA, Klaunzer F, Steinmassl O , et al. Evaluation of currently available CAD/CAM denture systems[J]. Int J Prosthodont, 2017,30(2):116-122.
[31] 王子轩, 孙玉春, 周永胜 . 数字化全口义齿的研究和应用进展[J]. 口腔颌面修复学杂志, 2017,18(5):291-295.
Wang ZX, Sun YC, Zhou YS . Research and app-lication progress of digital complete denture[J]. Chin J Prosthodont, 2017,18(5):291-295.
[32] 孙玉春, 孙儒, 邓珂慧 , 等. 全口义齿数字化修复技术的研发和应用进展[J]. 中华口腔医学杂志, 2018,53(1):60-65.
Sun YC, Sun R, Deng KH , et al. Research and deve-lopment of digital design and fabrication of complete denture[J]. Chin J Stomatol, 2018,53(1):60-65.
[33] Masri R, Driscoll CF . Clinical applications of digital dental technology[M]. Chichester: John Wiley & Sons, 2015: 107-138.
[34] 陈虎, 赵甜, 王勇 , 等. 基于初印模三维扫描的无牙颌上颌个性化托盘计算机辅助设计及三维打印[J]. 北京大学学报(医学版), 2016,48(5):900-904.
Chen H, Zhao T, Wang Y , et al. Computer aided design and 3-dimensional printing for the production of custom trays of maxillary edentulous jaws based on 3-dimensional scan of primary impression[J]. J Peking Univ (Health Sci), 2016,48(5):900-904.
[35] Chen H, Yang X, Chen LT , et al. Application of FDM three-dimensional printing technology in the digital manufacture of custom edentulous mandible trays[J]. Sci Rep, 2016,6:19207.
[36] 魏菱, 陈虎, 周永胜 , 等. 数字化全口义齿个别托盘制作与临床应用时间评价[J]. 北京大学学报(医学版), 2017,49(1):86-91.
Wei L, Chen H, Zhou YS , et al. Evaluation of pro-duction and clinical working time of computer-aided design/computer-aided manufacturing (CAD/CAM) custom trays for complete denture[J]. J Peking Univ (Health Sci), 2017,49(1):86-91.
[37] 林园园, 郑秀丽, 廖国婷 , 等. 3D打印无牙颌个别托盘的初步研究[J]. 口腔医学, 2016,36(12):1065-1069.
Lin YY, Zheng XL, Liao GT , et al. Preliminary study of 3D printing technology in edentulous jaw custom-tray fabricating technique[J]. Stomatology, 2016,36(12):1065-1069.
[38] 陈永亮, 史翠平, 刘伟才 , 等. 光固化与熔融堆积技术3D打印个别托盘的比较[J]. 口腔颌面修复学杂志, 2018,19(3):151-155.
Chen YL, Shi CP, Liu WC , et al. Comparison of SLA and FDM 3D printing technology in producing custom edentulous trays[J]. Chin J Prosthodont, 2018,19(3):151-155.
[39] Qu F, Du X, Liu WC . 3D-printed custom trays with a Gothic arch for centric relation recording and de-finitive impression making for complete dentures: a dental technique[J]. J Prosthet Dent, 2019,121(1):32-36.
[40] Maeda Y, Minoura M, Tsutsumi S , et al. A CAD/CAM system for removable denture. Part Ⅰ: fabrication of complete dentures[J]. Int J Prosthodont, 1994,7(1):17-21.
[41] Kanazawa M, Inokoshi M, Minakuchi S , et al. Trial of a CAD/CAM system for fabricating complete dentures[J]. Dent Mater J, 2011,30(1):93-96.
[42] Inokoshi M, Kanazawa M, Minakuchi S . Evaluation of a complete denture trial method applying rapid prototyping[J]. Dent Mater J, 2012,31(1):40-46.
[43] Goodacre CJ, Garbacea A, Naylor WP , et al. CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data[J]. J Prosthet Dent, 2012,107(1):34-46.
[44] Matsuda T, Goto T, Yagi K , et al. Part-digitizing sy-stem of impression and interocclusal record for com-plete denture fabrication[J]. J Prosthodont, 2016,25(6):503-509.
[45] 程祥荣, 华先明, 华中平 , 等. 计算机辅助全口义齿人工牙排列的研究[J]. 中华口腔医学杂志, 2000,35(2):147-149.
Cheng XR, Hua XM, Hua ZP , et al. The study of a computer aided artificial teeth arrangement of com-plete denture[J]. Chin J Stomatol, 2000,35(2):147-149.
[46] 华先明, 程祥荣 . 全口义齿计算机辅助设计系统的研制与应用[J]. 华西口腔医学杂志, 2001,19(4):235-236.
Hua XM, Cheng XR . Development and applications of a computer aided complete denture design system[J]. West China J Stomatol, 2001,19(4):235-236.
[47] 范骐磊 . 全口义齿数字化设计的研究及实现[D]. 南京: 南京航空航天大学, 2016.
Fan QL . Research on digital design of complete denture[D]. Nanjing: Nanjing University of Aeronau- tics and Astronautics, 2016.
[48] 吕培军, 王勇, 李国珍 , 等. 机器人辅助全口义齿排牙系统的初步研究[J]. 中华口腔医学杂志, 2001,36(2):139-142.
Lü PJ, Wang Y, Li GZ , et al. Development of a sy-stem for robot aided teeth alignment of complete denture[J]. Chin J Stomatol, 2001,36(2):139-142.
[49] 孙玉春, 吕培军, 王勇 , 等. 计算机辅助设计与快速成形技术辅助制作全口义齿的探讨[J]. 中华口腔医学杂志, 2007,42(6):324-329.
Sun YC, Lü PJ, Wang Y , et al. Research and deve-lopment of computer aided design and rapid pro-totyping technology for complete denture[J]. Chin J Stomatol, 2007,42(6):324-329.
[50] 孙玉春, 吕培军, 王勇 . 参数化定位全口义齿人工牙三维图形数据库的研究[J]. 口腔颌面修复学杂志, 2007,8(4):257-260.
Sun YC, Lü PJ, Wang Y . A study of a 3D graphic database of the artificial teeth which can be aligned with parameters[J]. Chin J Prosthodont, 2007,8(4):257-260.
[51] 韩景芸, 孙玉春 . 全口义齿数字化设计系统[J]. 北京工业大学学报, 2009,35(5):587-591.
Han JY, Sun YC . A digital system for complete den-ture[J]. J Beijing Univ Technol, 2009,35(5):587-591.
[52] Sun YC, Lü PJ, Wang Y . Study on CAD&RP for removable complete denture[J]. Comput Methods Programs Biomed, 2009,93(3):266-272.
[53] 寇小希, 董金城 . 应用ImageWare11解决人工牙邻面干涉问题的方法[J]. 机械工程与自动化, 2010 ( 4):56-58.
Kou XX, Dong JC . A solution based on ImageWare11 to the interference of artificial teeth[J]. Mech Eng & Autom, 2010(4):56-58.
[54] Zhang YD, Jiang JG, Liang T , et al. Kinematics modeling and experimentation of the multi-manipu-lator tooth-arrangement robot for full denture manu-facturing[J]. J Med Syst, 2011,35(6):1421-1429.
[55] Yuan FS, Sun YC, Wang Y , et al. Accuracy eva-luation of a new three-dimensional reproduction method of edentulous dental casts, and wax occlusion rims with jaw relation[J]. Int J Oral Sci, 2013,5(3):155-161.
[56] 孙玉春, 李虹, 王勇 , 等. 无牙颌模型正中关系位三维重建精度的定量评价[J]. 中华口腔医学杂志, 2014,49(6):371-374.
Sun YC, Li H, Wang Y , et al. Quantitative evaluation of three-dimensional reconstruction accuracy of edentulous models in centric relation[J]. Chin J Stomatol, 2014,49(6):371-374.
[57] Sun YC, Yuan FS, Li H , et al. Evaluation of the ac-curacy of a common regional registration method for three-dimensional reconstruction of edentulous jaw relation by a 7-axis three-dimensional measuring system[J]. Biomed Mater Eng, 2014,24(1):1275-1287.
[58] Li WW, Yuan FS, Lv P , et al. Evaluation of the quan-titative accuracy of 3D reconstruction of edentulous jaw models with jaw relation based on reference point system alignment[J]. PLoS One, 2015,10(2):e0117320.
[59] Chen H, Wang H, Lv P , et al. Quantitative evaluation of tissue surface adaption of CAD-designed and 3D printed wax pattern of maxillary complete denture[J]. Biomed Res Int, 2015,2015:453968.
[60] 王函, 吕培军, 王勇 , 等. 全口义齿牙列基托分体数字控制加工后装配粘接精度的定量评价[J]. 北京大学学报(医学版), 2016,48(5):884-888.
Wang H, Lü PJ, Wang Y , et al. Quantitative eva-luation of fabricating complete denture by computer numerical control in manufacturing dentition and baseplate separately plus adhesive molding[J]. J Peking University (Health Sci), 2016,48(5):884-888.
[61] Yuan FS, Lv P, Wang PF , et al. Custom fabrication of try-in wax complete denture[J]. Rapid Prototyp J, 2016,22(3):539-543.
[62] 李伟伟 . 无牙颌颌位关系数字记录方法的初步研究[D]. 北京: 北京大学, 2016.
Li WW . A preliminary study on the digital recording method of maxillomandibular relationship for eden-tulous patient[D]. Beijing: Peking University, 2016.
[63] Patzelt SB, Vonau S, Stampf S , et al. Assessing the feasibility and accuracy of digitizing edentulous jaws[J]. J Am Dent Assoc, 2013,144(8):914-920.
[64] Unkovskiy A, Wahl E, Zander AT , et al. Intraoral scanning to fabricate complete dentures with func-tional borders: a proof-of-concept case report[J]. BMC Oral Health, 2019,19(1):46.
[65] Katase H, Kanazawa M, Inokoshi M , et al. Face simulation system for complete dentures by applying rapid prototyping[J]. J Prosthet Dent, 2013,109(6):353-360.
[66] Schweiger J, Güth JF, Edelhoff D , et al. Virtual eva-luation for CAD-CAM-fabricated complete dentures[J]. J Prosthet Dent, 2017,117(1):28-33.
[1] 孙淑贞,杨亚东,杨坚. 中性区技术在全口义齿修复中的研究进展[J]. 国际口腔医学杂志, 2019, 46(6): 735-739.
[2] 胡常红. 回归治疗本质的无牙颌修复理念[J]. 国际口腔医学杂志, 2018, 45(6): 621-627.
[3] 孙学武 柳忠豪 朱详奎 杨柳. 不同颌位记录方法对全口义齿再修复患者咀嚼效率的影响[J]. 国际口腔医学杂志, 2014, 41(3): 286-288.
[4] 孙学武 柳忠豪 朱详奎 杨柳. 不同颌位关系记录法对全口义齿再修复患者义齿调 量影响的研究[J]. 国际口腔医学杂志, 2014, 41(2): 146-148.
[5] 孙惠强1,2 刘金2. 全口义齿印模技术的进展介绍[J]. 国际口腔医学杂志, 2013, 40(6): 701-705.
[6] 王万伟 1 韦玉舫 2 李军 1 张婷婷 1. 医患沟通对全口义齿修复满意率的影响[J]. 国际口腔医学杂志, 2013, 40(2): 160-161.
[7] 邵琦1 孙惠强1,2 邓艳南1 万浩元1. 中性区技术在义齿制作中的应用[J]. 国际口腔医学杂志, 2012, 39(2): 174-176.
[8] 孙学武综述 柳忠豪审校. 无牙颌全口义齿再修复患者的颌位记录方法[J]. 国际口腔医学杂志, 2011, 38(5): 614-616.
[9] 王菁综述 郭天文审校. 外胚叶发育不全综合征患儿的口腔修复治疗进展[J]. 国际口腔医学杂志, 2010, 37(6): 727-731.
[10] 张凤1,李希庭2综述 魏素华1审校. 义齿稳固剂的研究进展[J]. 国际口腔医学杂志, 2007, 34(06): 464-466.
[11] 沈颉飞. 全口义齿固位效果研究进展[J]. 国际口腔医学杂志, 2004, 31(S1): -.
[12] 骆筱秋 宋宏杰 梁星. 心理学知识在全口义齿修复治疗中的运用[J]. 国际口腔医学杂志, 2004, 31(02): 161-162.
[13] 赵克. 义齿稳固剂的新评价[J]. 国际口腔医学杂志, 2000, 27(05): -.
[14] 高勃. 快速成型技术及其在口腔医学中的应用[J]. 国际口腔医学杂志, 2000, 27(05): -.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 张京剧. 青年期至中年期颅面复合体变化的头影测量研究[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 刘玲. 镍铬合金中铍对可铸造性和陶瓷金属结合力的影响[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 王昆润. 在种植体上制作固定义齿以后下颌骨密度的动态变化[J]. 国际口腔医学杂志, 1999, 26(06): .
[4] 王昆润. 重型颌面部炎症死亡和康复病例的实验室检查指标比较[J]. 国际口腔医学杂志, 1999, 26(06): .
[5] 逄键梁. 两例外胚层发育不良儿童骨内植入种植体后牙槽骨生长情况[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 温秀杰. 氟化物对牙本质脱矿抑制作用的体外实验研究[J]. 国际口腔医学杂志, 1999, 26(05): .
[7] 杨春惠. 耳颞神经在颞颌关节周围的分布[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 王昆润. 牙周炎加重期应选用何种抗生素[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 杨儒壮 孙宏晨 欧阳喈. 纳米级高分子支架材料在组织工程中的研究进展[J]. 国际口腔医学杂志, 2004, 31(02): 126 -128 .
[10] 严超然,李龙江. 肿瘤靶向药物载体系统的研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .