国际口腔医学杂志

国际口腔医学杂志 ›› 2019, Vol. 46 ›› Issue (1): 94-98.doi: 10.7518/gjkq.2019.01.017

• 综述 • 上一篇    下一篇

核瓷和饰瓷厚度变化对全瓷修复体抗弯强度影响的研究进展

靳志亨,李清()   

  1. 武汉大学口腔医院修复科 武汉 430079
  • 收稿日期:2018-03-03 修回日期:2018-08-24 出版日期:2019-01-01 发布日期:2019-01-11
  • 通讯作者: 李清
  • 作者简介:靳志亨,硕士,Email：759584337@qq.com
  • 基金资助:
    湖北省自然科学基金(ZRMS2017000043)

Research progress on the thickness of core and veneering porcelain on the flexural strength of all-ceramic restoration

Zhiheng Jin,Qing Li()   

  1. Dept. of Prosthodontics, Hospital of Stomatology, Wuhan University, Wuhan 430079, China
  • Received:2018-03-03 Revised:2018-08-24 Online:2019-01-01 Published:2019-01-11
  • Contact: Qing Li
  • Supported by:
    This study was supported by the Nature Science Foundation of Hubei Province(ZRMS2017000043)

RichHTML

18

PDF (PC)

135

摘要：

随着人们对口腔美学要求的不断提高,全瓷修复成为当前口腔固定修复的主要趋势。但是,由核瓷与饰面瓷构成的全瓷修复体的力学强度仍是人们关注的问题之一。因此,如何更好地设计全瓷修复体以应对口腔较为复杂的咬合力将显得格外重要,尤其是核瓷与饰面瓷厚度改变时,修复体抗弯强度将如何变化依旧没有定论。目前,已有不少关于这方面的研究,但各研究之间的实验设计、背景、方法等并不相同,本文将对这些差异性因素进行介绍与分析。

关键词: 核瓷, 饰面瓷, 厚度, 抗弯强度

Abstract:

With the increasing demand for oral esthetics, porcelain restoration has become the main trend of fixed dental prostheses. However, the mechanical strength of all-ceramic restorations composed of core porcelain and veneering porcelain is one of the concerns about clinical applications. Therefore, we should determine the effective designs of all-ceramic restorations to bear the complicated occlusal force of the oral cavity. However, the influence of the thickness of core porcelain and veneering porcelain on the flexural strength of full-ceramic restorations remains unclear. Comprehensive investigations have focused on the mechanical properties of full-ceramic restorations. Various experimental designs, backgrounds, and methods have been developed. This paper reviews previous studies and analyzes their differences.

Key words: core porcelain, veneering porcelain, thickness, flexural strength

中图分类号: 

  • R783.3
[1] Bruni YL, Garrido LB, Albano MP , et al. Effects of surface treatments on Y-TZP phase stability, micro-structure and osteoblast cell response[J]. Ceram Int, 2015,41(10):14212-14222.
doi: 10.1016/j.ceramint.2015.07.047
[2] 李亚芹, 吕文芳, 曹阳 , 等. 基底冠形态设计对氧化锆全冠抗折强度的影响[J]. 口腔医学研究, 2018,34(1):73-76.
Li YQ, Lü WF, Cao Y , et al. Influence of framework design on fracture strength of zirconia crown[J]. J Oral Sci Res, 2018,34(1):73-76.
[3] Zhang Y . Making yttria-stabilized tetragonal zirconia translucent[J]. Dent Mater, 2014,30(10):1195-1203.
doi: 10.1016/j.dental.2014.08.375 pmid: 25193781
[4] Kürklü D, Azer SS, Yilmaz B , et al. Porcelain thic-kness and cement shade effects on the colour and translucency of porcelain veneering materials[J]. J Dent, 2013,41(11):1043-1050.
doi: 10.1016/j.jdent.2013.08.017 pmid: 24004966
[5] Shokry TE, Shen C, Elhosary MM , et al. Effect of core and veneer thicknesses on the color parameters of two all-ceramic systems[J]. J Prosthet Dent, 2006,95(2):124-129.
doi: 10.1016/j.prosdent.2005.12.001 pmid: 16473086
[6] Jang GW, Kim HS, Choe HC , et al. Fracture strength and mechanism of dental ceramic crown with zirconia thickness[J]. Procedia Eng, 2011,10:1556-1560.
doi: 10.1016/j.proeng.2011.04.260
[7] Santos RLP, Silva FS, Nascimento RM , et al. Shear bond strength of veneering porcelain to zirconia: Effect of surface treatment by CNC-milling and composite layer deposition on zirconia[J]. J Mech Behav Biomed Mater, 2016,60:547-556.
doi: 10.1016/j.jmbbm.2016.03.015 pmid: 27058002
[8] Cotic J, Jevnikar P, Kocjan A , et al. Complexity of the relationships between the sintering-temperature-dependent grain size, airborne-particle abrasion, ageing and strength of 3Y-TZP ceramics[J]. Dent Mater, 2016,32(4):510-518.
doi: 10.1016/j.dental.2015.12.004
[9] Zeng XM, Lai AL, Gan CL , et al. Crystal orientation dependence of the stress-induced martensitic trans-formation in zirconia-based shape memory ceramics[J]. Acta Materialia, 2016,116:124-135.
doi: 10.1016/j.actamat.2016.06.030
[10] Nishiyama N, Wakai F, Ohfuji H , et al. Fracture-induced amorphization of polycrystalline SiO2 sti-shovite: a potential platform for toughening in ceramics[J]. Sci Rep, 2014,4:6558.
doi: 10.1038/srep06558 pmid: 4190503
[11] Yoshida K, Wakai F, Nishiyama N , et al. Large increase in fracture resistance of stishovite with crack extension less than one micrometer[J]. Sci Rep, 2015,5:10993.
doi: 10.1038/srep10993 pmid: 26051871
[12] Sgura R, dos Reis MC, Salvadori MC , et al. CO2 laser glazing treatment of a veneering porcelain: effects on porosity, translucency, and mechanical properties[J]. Oper Dent, 2015,40(3):247-254.
doi: 10.2341/14-079-L
[13] Rinke S, Hüls A . Copy-milled aluminous core ceramic crowns: a clinical report[J]. J Prosthet Dent, 1996,76(4):343-346.
doi: 10.1016/S0022-3913(96)90535-1 pmid: 8897287
[14] al-Shehri SA, Mohammed H, Wilson CA . Influence of lamination on the flexural strength of a dental castable glass ceramic[J]. J Prosthet Dent, 1996,76(1):23-28.
doi: 10.1016/S0022-3913(96)90341-8 pmid: 8814630
[15] 刘亦洪, 冯海兰, 包亦望 , 等. 基底瓷与饰瓷的厚度比对IPS Empress Ⅱ热压铸陶瓷抗弯强度的影响[J]. 北京大学学报(医学版), 2007,39(1):64-66.
doi: 10.3321/j.issn:1671-167X.2007.01.017
Liu YH, Feng HL, Bao YW , et al. Effect of core: dentin thickness ratio on the flexure strength of IPS Empress Ⅱ heat pressed all ceramic restorative ma-terial[J]. J Peking Univ (Health Sci), 2007,39(1):64-66.
doi: 10.3321/j.issn:1671-167X.2007.01.017
[16] Su NC, Liao YM, Zhang H , et al. Effects of core-to-dentin thickness ratio on the biaxial flexural strength, reliability, and fracture mode of bilayered materials of zirconia core (Y-TZP) and veneer indirect composite resins[J]. J Prosthet Dent, 2017,117(1):150-157.
doi: 10.1016/j.prosdent.2016.04.017
[17] Fleming GJ, El-Lakwah SF, Harris JJ , et al. The effect of core: dentin thickness ratio on the bi-axial flexure strength and fracture mode and origin of bilayered dental ceramic composites[J]. Dent Mater, 2005,21(2):164-171.
doi: 10.1016/j.dental.2004.01.005 pmid: 15681015
[18] Nawafleh N, Hatamleh MM, Öchsner A , et al. The impact of core/veneer thickness ratio and cyclic loading on fracture resistance of lithium disilicate crown[J]. J Prosthod, 2018,27(1):75-82.
doi: 10.1111/jopr.12473 pmid: 26965298
[19] 施海兰, 胡书海, 张磊 , 等. 不同核心瓷与饰面瓷厚度比对氧化锆双层瓷结构强度的影响[J]. 中国组织工程研究, 2012,16(3):499-502.
doi: 10.3969/j.issn.1673-8225.2012.03.026
Shi HL, Hu SH, Zhang L , et al. Different thickness ratios of core to veneer influence the flexural strength of bilayered zirconia ceramic[J]. J Clin Rehabil Tissue Eng Res, 2012,16(3):499-502.
doi: 10.3969/j.issn.1673-8225.2012.03.026
[20] 邓增艳, 胡书海, 任翔 , 等. 基底瓷厚度变化对氧化锆双层瓷结构抗折强度的影响[J]. 大连医科大学学报, 2013,35(1):26-29.
doi: 10.11724/jdmu.2013.01.06
Deng ZY, Hu SH, Ren X , et al. Effect of core thick-ness changes on the flexural strength of layered zirconia and porceplain dental ceramics materials[J]. J Dalian Med Univ, 2013,35(1):26-29.
doi: 10.11724/jdmu.2013.01.06
[21] Sinmazisik G, Tarcin B, Demirbas B , et al. The effect of zirconia thickness on the biaxial flexural strength of zirconiaceramic bilayered discs[J]. Dent Mater J, 2015,34(5):640-647.
doi: 10.4012/dmj.2014-340 pmid: 26438987
[22] Zeng K, Odén A, Rowcliffe D . Evaluation of mecha-nical properties of dental ceramic core materials in combination with porcelains[J]. Int J Prosthodont, 1998,11(2):183-189.
[23] Benetti P, Pelogia F, Valandro LF , et al. The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system[J]. Dent Mater, 2011,27(9):948-953.
doi: 10.1016/j.dental.2011.05.009 pmid: 21705061
[24] Guazzato M, Walton TR, Franklin W , et al. Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures[J]. Aust Dent J, 2010,55(3):306-310.
doi: 10.1111/j.1834-7819.2010.01239.x pmid: 20887519
[25] Swain MV . Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures[J]. Acta Biomater, 2009,5(5):1668-1677.
doi: 10.1016/j.actbio.2008.12.016 pmid: 19201268
[26] Yilmaz H, Aydin C, Gul BE . Flexural strength and fracture toughness of dental core ceramics[J]. J Prosthet Dent, 2007,98(2):120-128.
doi: 10.1016/S0022-3913(07)60045-6 pmid: 17692593
[27] Touaiher I, Saâdaoui M, Chevalier J , et al. Effect of loading configuration on strength values in a highly transformable zirconia-based composite[J]. Dent Mater, 2016,32(9):e211-e219.
doi: 10.1016/j.dental.2016.06.023 pmid: 27435051
[28] Xu YX, Han JM, Lin H , et al. Comparative study of flexural strength test methods on CAD/CAM Y-TZP dental ceramics[J]. Regen Biomater, 2015,2(4):239-244.
doi: 10.1093/rb/rbv020 pmid: 4676327
[29] Albakry M, Guazzato M, Swain MV . Fracture tough-ness and hardness evaluation of three pressable all-ceramic dental materials[J]. J Dent, 2003,31(3):181-188.
doi: 10.1016/S0300-5712(03)00025-3 pmid: 12726702
[30] Thompson GA . Influence of relative layer height and testing method on the failure mode and origin in a bilayered dental ceramic composite[J]. Dent Mater, 2000,16(4):235-243.
doi: 10.1016/S0109-5641(00)00005-1 pmid: 10831777
[31] Borba M, de Araújo MD, Fukushima KA , et al. Effect of different aging methods on the mechanical be-havior of multi-layered ceramic structures[J]. Dent Mater, 2016,32(12):1536-1542.
doi: 10.1016/j.dental.2016.09.005 pmid: 27726968
[32] Zinszner JL, Erzar B, Forquin P . Strain rate sensi-tivity of the tensile strength of two silicon carbides: experimental evidence and micromechanical model-ling[J]. Philos Trans A Math Phys Eng Sci, 2017,375(2085):20160167.
doi: 10.1098/rsta.2016.0167 pmid: 27956504
[33] White SN, Miklus VG, McLaren EA , et al. Flexural strength of a layered zirconia and porcelain dental all-ceramic system[J]. J Prosthet Dent, 2005,94(2):125-131.
doi: 10.1016/j.prosdent.2005.05.007 pmid: 16046966
[34] Lang LA, Wang RF, Kang B , et al. Validation of finite element analysis in dental ceramics research[J]. J Prosthet Dent, 2001,86(6):650-654.
doi: 10.1067/mpr.2001.120839 pmid: 11753319
[35] Aboushelib MN, Wang H . Influence of crystal structure on debonding failure of zirconia veneered restorations[J]. Dent Mater, 2013,29(7):e97-e102.
doi: 10.1016/j.dental.2013.04.008 pmid: 23694843
[36] Jian YT, Tang TY, Swain MV , et al. Effect of core ceramic grinding on fracture behaviour of bilayered zirconia veneering ceramic systems under two loading schemes[J]. Dent Mater, 2016,32(12):1453-1463.
doi: 10.1016/j.dental.2016.06.007 pmid: 27692707
[1] 黄依欢,李委航,马典,陈瑾,钱捷,李旭东. IPS e.maxCAD和Lava Ultimate在贴面修复中的有限元分析[J]. 国际口腔医学杂志, 2023, 50(4): 423-432.
[2] 沈冬妮,施莹,傅柏平. 后牙牙合贴面修复的研究进展[J]. 国际口腔医学杂志, 2021, 48(3): 287-291.
[3] 钱慧芬,林云红,吴美莹,代自超,李星星. 瓷层厚度和变色基底对瓷贴面修复四环素牙光学性能的影响[J]. 国际口腔医学杂志, 2020, 47(4): 413-417.
[4] 张婧婷,潘旭东,张文云. 遮色层厚度对聚醚醚酮-Crea.lign修复体颜色的影响[J]. 国际口腔医学杂志, 2020, 47(4): 418-423.
[5] 黄满英,付云. 牙龈生物型的测量方法[J]. 国际口腔医学杂志, 2019, 46(2): 171-176.
[6] 刘玲玲,刘树泰. 上颌腭侧软组织厚度的测量方法及影响因素[J]. 国际口腔医学杂志, 2019, 46(2): 234-237.
[7] 张停停,宗娟娟. 自体结缔组织移植术的研究现状[J]. 国际口腔医学杂志, 2019, 46(1): 89-93.
[8] 罗志强, 叶钟泰. 新疆地区不同人群上颌窦外侧骨壁厚度的锥形束CT测量分析[J]. 国际口腔医学杂志, 2017, 44(1): 55-58.
[9] 高原,徐佳蕾,杨倩,黄定明,周学东. 根管内分离器械的处理评估与取出策略[J]. 国际口腔医学杂志, 2016, 43(3): 249-259.
[10] 谢雨菲 陆佩珺 胡铮 冯静 沈刚. 颧牙槽嵴区域骨密质厚度的锥形束CT测量分析[J]. 国际口腔医学杂志, 2014, 41(3): 281-285.
[11] 张倩倩1 丘小丽2 高姗姗1 于海洋1. 酸性环境下饰面瓷的摩擦磨损行为研究[J]. 国际口腔医学杂志, 2014, 41(3): 272-276.
[12] 李佳岭1 李小兵2 李佳园3. 内收下切牙对下切牙区牙槽骨改建的影响[J]. 国际口腔医学杂志, 2011, 38(4): 392-394.
[13] 邬烈,骆小平,舒成军,. 不同厚度纯钛基底冠适合性的比较研究[J]. 国际口腔医学杂志, 2007, 34(05): 328-330.
[14] 黄慧,张富强. 双层瓷修复材料的研究现状[J]. 国际口腔医学杂志, 2005, 32(06): 414-416.
Viewed
Full text


Abstract

Cited
  Shared   
  Discussed   
[1] 张京剧. 青年期至中年期颅面复合体变化的头影测量研究[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 刘玲. 镍铬合金中铍对可铸造性和陶瓷金属结合力的影响[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 王昆润. 在种植体上制作固定义齿以后下颌骨密度的动态变化[J]. 国际口腔医学杂志, 1999, 26(06): .
[4] 王昆润. 重型颌面部炎症死亡和康复病例的实验室检查指标比较[J]. 国际口腔医学杂志, 1999, 26(06): .
[5] 逄键梁. 两例外胚层发育不良儿童骨内植入种植体后牙槽骨生长情况[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 温秀杰. 氟化物对牙本质脱矿抑制作用的体外实验研究[J]. 国际口腔医学杂志, 1999, 26(05): .
[7] 杨春惠. 耳颞神经在颞颌关节周围的分布[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 王昆润. 牙周炎加重期应选用何种抗生素[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 杨儒壮 孙宏晨 欧阳喈. 纳米级高分子支架材料在组织工程中的研究进展[J]. 国际口腔医学杂志, 2004, 31(02): 126 -128 .
[10] 严超然,李龙江. 肿瘤靶向药物载体系统的研究进展[J]. 国际口腔医学杂志, 2008, 35(S1): .