国际口腔医学杂志 ›› 2009, Vol. 36 ›› Issue (4): 476-478.doi: 10.3969/j.issn.1673-5749.2009.04.030

• 综述 • 上一篇    下一篇

牙齿磨耗的测量方法

阎英综述 凌均棨审校   

  1. 中山大学光华口腔医学院口腔医学研究所 广东 广州 510055
  • 收稿日期:2008-12-30 修回日期:2009-05-06 出版日期:2009-07-20 发布日期:2009-07-20
  • 通讯作者: 凌均棨

Methods of measuring wear of teeth

YAN Ying, LING Jun-qi   

  1. Research Institute of Stomatology, Guanghua School of Stomatology, Sun Yat-Sen Un
  • Received:2008-12-30 Revised:2009-05-06 Online:2009-07-20 Published:2009-07-20
  • Contact: LING Jun-qi

摘要: 牙齿磨耗常见于牙病诊疗中,是上下牙齿相互作用的结果,可导致由牙本质暴露引起的局部不适和牙冠变短引起的美观问题,甚至危及口腔功能。若不加以控制,磨耗可能导致咀嚼肌功能失调且伴随生活质量的下降和健康系统的恶化。寻找测量磨耗的最佳方法是研究牙齿磨耗的关键,本文就牙齿磨耗的指数分级测量法和牙齿磨耗定量测量法中的牙尖高度测量、二维测量、三维测量法及其在口腔正畸、口腔修复和口腔颌面外科中的应用进行综述。

关键词: 磨耗, 牙齿模型, 扫描, 三维成像, 测量方法

Abstract: Tooth wear is frequently seen in dental practice. It is an important consequence of occlusal interactions. This can result in discomfort when areas of dentine become exposed, and lead to unacceptable aesthetic changes associated with reduced crown height and, in some cases, compromised function. If not controlled, wear could lead to poor masticatory function with a concomitant reduction in quality of life and possible deterioration of systemic health. Therefore, when considering how to control wear, the best method of measuring wear must be found. This review focused on some universally used methods of measuring wear, such as the indexes for measuring the wear of tooth, the cusp height measurement method, two -dimensional digital measurement method and three-dimensional digital measurement method and application in orthodontics, prosthodontics and oral and maxillofacial surgeons.

Key words: wear, dental cast, scanning, three-dimensional imaging, method of measuring

[1] 刘盼明,李政泽,李军鹤,崔淑霞. 成人骨性Ⅱ类患者不同垂直骨面型上颌窦容积及口咽气道体积的锥形束计算机断层扫描研究[J]. 国际口腔医学杂志, 2023, 50(5): 528-537.
[2] 雒琪玥,柳叶语,罗依麟,满毅. 以正中关系为中心、面部美学及修复为导向的数字化无牙颌种植修复1例[J]. 国际口腔医学杂志, 2022, 49(4): 426-431.
[3] 赵喆,王富,郑秀丽,安娜,陈吉华. 功能载荷下牙移动测量方法的研究进展[J]. 国际口腔医学杂志, 2022, 49(3): 362-366.
[4] 刘力嘉,毛婧,龙欢,蒲亚龙,王军. 二维与三维头影测量自动定点的研究进展[J]. 国际口腔医学杂志, 2022, 49(1): 100-108.
[5] 周梦琪,陈学鹏,傅柏平. 正畸治疗中牙槽骨骨开窗骨开裂的预防和应对策略[J]. 国际口腔医学杂志, 2021, 48(5): 600-608.
[6] 伍春兰,唐华,陈军. 成人骨性Ⅱ类高角开牙合患者上下切牙区牙槽骨形态的三维研究[J]. 国际口腔医学杂志, 2021, 48(4): 426-432.
[7] 王立冬,马文,付帅,张长彬,崔庆赢,梁燕,黎明. 不同方法制作正颌手术数字化牙合板的研究及精确性分析[J]. 国际口腔医学杂志, 2021, 48(2): 156-164.
[8] 张紫涵,熊鑫,王军. 三维头影测量的研究现状和应用发展[J]. 国际口腔医学杂志, 2020, 47(6): 739-744.
[9] 王勇. 全口义齿数字化技术分析[J]. 国际口腔医学杂志, 2020, 47(1): 1-9.
[10] 黄满英,付云. 牙龈生物型的测量方法[J]. 国际口腔医学杂志, 2019, 46(2): 171-176.
[11] 赵莹,杨柳,谢宇,张艳,魏溦,李江. 扫描对象对计算机辅助设计/计算机辅助制造钴铬烤瓷冠精确性影响的研究[J]. 国际口腔医学杂志, 2018, 45(6): 686-689.
[12] 刘晓华, 王恩博. 儿童埋伏多生牙拔除术锥形束计算机断层扫描影像学定位的应用进展[J]. 国际口腔医学杂志, 2018, 45(3): 295-300.
[13] 尹一佳, 冯捷, 罗梦奇, 韩向龙. 三维立体摄影技术自然头位校正方法的研究进展[J]. 国际口腔医学杂志, 2018, 45(3): 301-306.
[14] 朱宸佑, 邓佳, 干洲杰, 刘浏, 王天璐, 曹聪, 屈依丽. 锥形束电子计算机断层扫描在上颌前牙区牙槽骨的测量方法与分型标准中的应用[J]. 国际口腔医学杂志, 2018, 45(1): 59-63.
[15] 姚陈敏, 周丽群, 黄翠. 前牙磨耗牙色修复材料的选择[J]. 国际口腔医学杂志, 2017, 44(3): 363-367.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 王昆润. 二甲亚砜和双氯芬酸并用治疗根尖周炎[J]. 国际口腔医学杂志, 1999, 26(06): .
[2] 汤庆奋,王学侠. 17β-雌二醇对人类阴道和口腔颊粘膜的渗透性[J]. 国际口腔医学杂志, 1999, 26(06): .
[3] 潘劲松. 颈总动脉指压和颈内动脉球囊阻断试验在大脑血液动力学中的不同影响[J]. 国际口腔医学杂志, 1999, 26(05): .
[4] 王昆润. 后牙冠根斜形牙折的治疗[J]. 国际口腔医学杂志, 1999, 26(05): .
[5] 杨锦波. 嵌合体防龋疫苗的研究进展[J]. 国际口腔医学杂志, 1999, 26(05): .
[6] 王昆润. 下颔骨成形术用网状钛板固定植骨块[J]. 国际口腔医学杂志, 1999, 26(04): .
[7] 汪月月,郭莉莉. 口腔机能与老化—痴呆危险因素流行病学研究[J]. 国际口腔医学杂志, 1999, 26(04): .
[8] 丁刚. 应用硬组织代用品种植体行丰颏术[J]. 国际口腔医学杂志, 1999, 26(04): .
[9] 田磊. 局部应用脂多糖后结合上皮反应性增生的变化[J]. 国际口腔医学杂志, 1999, 26(04): .
[10] 戴青. 口腔念珠菌病的新分类[J]. 国际口腔医学杂志, 1999, 26(04): .